Specification Home
Products

Spray Bodies

Spray Nozzles

Rotors & Impacts

Valves & Valve Boxes

Controllers

Central Control

Drip

Drainage

Pumps & Filters

Industry Certified Products

Documentation

CAD & Drawings

Design Guides

Performance Charts

Design Resources

Pressure Loss Tables

Regulation

Training

Pumps

Features

Variable Frequency Drive (VFD) provides a wide range of hydraulic coverage
Pump Start Relay included (24VAC/DC) to make the station ready to accept controller signals
Marine-Grade Aluminum Deck and Enclosure to stand up to the elements
Powder-coated steel piping  
Isolation Valve for easy maintenance and priming
Manual Switch provides the user full control and override capabilities  
3" Grooved Discharge, 3" Grooved Intake  
Liquid filled suction and discharge gauges for fast set point setting and troubleshooting
Available in single and three phase 208V, 220V, 230V, VAC and three phase 480V VAC configurations  
Mounting options for Rain Bird Controllers (purchased separately)
Plumbing Configurations
Inlet and discharge piping on opposite sides of the enclosure (as shown). ¾” and 2” Priming Ports Included
Mechanical Features
Isolation valve  
Liquid filled pressure gauge  
Rugged centrifugal pump (Suction Lift model is self-priming)

Specifications

Enclosures / External Connections
Marine grade aluminum enclosure and deck  
Stainless Steel piping  
Fused main power disconnect  
Pump Control Runs based on signal from irrigation controller, or from optional Flow Start Switch (Boost model only)  
24VAC Pump start relay included. Other voltages available as an accessory  
130 °F Temperature cutout switch
Options and Accessories
Stainless steel piping to replace internal powder-coated steel piping (Contact Rain Bird Factory for availability)  
Pump Start Relay - 6VDC, 12VDC    
Controller Mounting Bracket: Controller can be mounted inside or outside of aluminum casing  
Surge Suppression Kit: --Single Phase (208-230 VAC); Three Phase (208-230 VAC or 480 VAC)Foot valve – 4” Vertical Flanged p/n CLPFTVLV4VF

Model Listing

3 HP Models

  • CLP03AAC4: CLP, 3HP PUMP A, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P    
  • CLP03CAC4: CLP, 3HP PUMP C, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P  
  • CLP03AAC8: CLP, 3HP PUMP A, BST, AL, CARBON STEEL PIPE, 480VAC, 3P  
  • CLP03CAC8: CLP, 3HP PUMP C, BST, AL, CARBON STEEL PIPE, 480VAC, 3P  

    • 5 HP Models

  • CLP05BAC4: CLP, 5HP PUMP B, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P    
  • CLP05DAC4: CLP, 5HP PUMP D, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P  
  • CLP05EAC4: CLP, 5HP PUMP E, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P      
  • CLP05FAC4: CLP, 5HP PUMP F, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P  
  • CLP05BAC8: CLP, 5HP PUMP B, BST, AL, CARBON STEEL PIPE, 480VAC, 3P      
  • CLP05DAC8: CLP, 5HP PUMP D, BST, AL, CARBON STEEL PIPE, 480VAC, 3P  
  • CLP05EAC8: CLP, 5HP PUMP E, BST, AL, CARBON STEEL PIPE, 480VAC, 3P  
  • CLP05FAC8: CLP, 5HP PUMP F, BST, AL, CARBON STEEL PIPE, 480VAC, 3P
  • CLP05BAC8: CLP, 5HP PUMP B, BST, AL, CARBON STEEL PIPE, 480VAC, 3P

    • 7.5 HP Models

  • CLP07GAC4: CLP, 7.5HP PUMP G, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P    
  • CLP07HAC4: CLP, 7.5HP PUMP H, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P  
  • CLP07JAC4: CLP, 7.5HP PUMP J, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P  
  • CLP07GAC8: CLP, 7.5HP PUMP G, BST, AL, CARBON STEEL PIPE, 480VAC, 3P  
  • CLP07HAC8: CLP, 7.5HP PUMP H, BST, AL, CARBON STEEL PIPE, 480VAC, 3P  
  • CLP07JAC8: CLP, 7.5HP PUMP J, BST, AL, CARBON STEEL PIPE, 480VAC, 3P

    • 10 HP Models

  • CLP10KAC4: CLP, 10HP PUMP K, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P  
  • CLP10LAC4: CLP, 10HP PUMP L, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P  
  • CLP10NAC4: CLP, 10HP PUMP N, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P  
  • CLP10NAC4: CLP, 10HP PUMP N, BST, AL, CARBON STEEL PIPE, 200VAC, 1P or 3P  
  • CLP10NAC8: CLP, 10HP PUMP N, BST, AL, CARBON STEEL PIPE, 480VAC, 3P

    • Features

    Variable Frequency Drive (VFD)  
    Pump Start Relay included (24VAC/DC with surge protection)  
    Flow Switch included  
    Bladder Tank included  
    Marine-Grade Aluminum Enclosure and deck with an exhaust fan  
    Isolation Valves for easy maintenance  
    Auto-Off-Manual Switch provides the user full control and override capabilities  
    Available in single and three phase 208V, 220V, 230V, VAC and three phase 480V VAC configurations  
    Multiple options for boost, flooded suction, and suction lift applications (see options list)  
    External Fault / Alarm and Run lights
    Plumbing Configurations
    Inlet and discharge piping on opposite sides of the enclosure  
    ½" priming port  
    Mechanical Features
    Discharge and intake isolation valves  
    Liquid filled pressure gauges on intake and discharge piping  
    Rugged centrifugal pump

    Specifications

    24V AC/DC pump start relay included for optional remote control Autonomous controls with wake on low pressure and retire on low flow  
    Low flow rate is verified with a pressure test prior to retiring the pump to prevent frequent motor starts and extend equipment life  
    Power Requirement: Single or three phase 208V, 220V, 230V AC or three phase 480V AC  
    TEFC Motor  
    UL Listed QCZJ packaged pump system file E249335  
    UL Listed NITW control panel file E251596
    Options and Accessories
    Rain Bird automatic suction scanning filter  
    Surge Suppression Kit: Single phase (208V, 220V, or 230V AC); Three phase (208V, 220V, 230V or 480V AC)  
    Stainless steel piping to replace internal powder coated carbon steel piping  
    Environmental package, includes space heater and enclosure insulation  
    Passive intake strainer and foot valve assembly for suction lift applications  
    Self-cleaning inlet strainer and foot valve assembly for improved suction lift performance

    Model Listing

    3HP Models:

  • ACLP03ACC: Up to 140 GPM at 18 PSI or up to 30 GPM at 39 PSI  
  • ACLP03CAC: Up to 68 GPM at 32 PSI or up to 24 GPM at 41 PSI    

    • 5HP Models:

  • ACLP05BAC: Up to 190 GPM at 23 PSI or up to 100 GPM at 29 PSI  
  • ACLP05DAC: Up to 75 GPM at 49 PSI or up to 25 GPM at 61 PSI      
  • ACLP05EAC: Up to 160 GPM at 30 PSI or up to 40 GPM at 55 PSI  
  • ACLP05FAC: Up to 90 GPM at 55 PSI or up to 35 GPM at 71 PSI    

    • 7.5HP Models:

  • ACLP07GAC: Up to 220 GPM at 29 PSI or up to 110 GPM at 36 PSI  
  • ACLP07HAC: Up to 140 GPM at 54 PSI or up to 40 GPM at 65 PSI  
  • ACLP07JAC: Up to 85 GPM at 75 PSI or up to 30 GPM at 90 PSI    

    • 10HP Models:

  • ACLP10KAC: Up to 240 GPM at 45 PSI or up to 120 GPM at 54 PSI  
  • ACLP10LAC: Up to 160 GPM at 64 PSI or up to 40 GPM at 79 PSI  
  • ACLP10NAC: Up to 100 GPM at 89 PSI or up to 30 GPM at 114 PSI  

    • 15HP Models:

  • ACLP15OAC: Up to 300 GPM at 59 PSI or up to 140 GPM at 74 PSI  
  • ACLP15PAC: Up to 200 GPM at 79 PSI or up to 50 GPM at 102 PSI  
  • ACLP15RAC: Up to 340 GPM at 51 PSI or up to 80 GPM at 67 PSI  
  • ACLP15SAC: Up to 180 GPM at 77 PSI or up to 100 GPM at 96 PSI    

    • 20HP Models:

  • ACLP20TAC: Up to 300 GPM at 64 PSI or up to 140 GPM at 79 PSI  
  • ACLP20UAC: Up to 200 GPM at 88 PSI or up to 50 GPM at 110 PSI  
  • ACLP20VAC: Up to 360 GPM at 60 PSI or up to 80 GPM at 78 PSI  
  • ACLP20WAC: Up to 200 GPM at 83 PSI or up to 100 GPM at 112 PSI

    • Features

    Cost effective – Standardized VFD driven pump system in enclosure delivers high performance with minimum investment  
    Low Profile – Compact aluminum enclosure with powder-coated skid and piping  
    Energy efficient – Variable Frequency Drive (VFD) maintains constant pressure at varying flow demand  
    Reliability – Simple, standard design, easy installation and maintenance  
    Mechanical Features
    Inlet Butterfly Isolation Valve  
    Discharge Butterfly Isolation Valve  
    Silent Check Valve  
    Enclosures / External Connections
    Marine-Grade Aluminum Enclosure  
    Polyester Powder-Coated Steel Deck and Piping  
    Thermostat and Fan on Mechanical Enclosure  
    Pump Control
    Pump Start Relay  
    VFD - Variable Frequency Drive for Control of Pressure  
    Display
    Monochrome Touch Screen Display

    Specifications

    LP Series – Horizontal End Suction - 1 Pump – Aluminum Enclosure
    Motor Size : (5 HP), ( 7.5 HP), (10 HP)
    Pump Type: Horizontal End Suction
    Power Requirement: (480/60/3 V/HZ/PH), (208-230/60/3 V/HZ/PH), (208-230/60/1 V/HZ/PH)
    Inlet Pressure Requirement: Suction Lift or Boost Applications
    Outlet Pressure:Up to 100 psi (6.9 bar)
    Outlet Flow: Up to 200 gpm (12.6 lps, 45.4 m3/h) 
    Inlet / Discharge Size: 3" flange fitting standard - 2" and 4" Flange fitting adapters available
    LP Series – Vertical Multistage – 1 Pump – Aluminum Enclosure
    Motor Size: (1 HP),  (1.5 HP), (2 HP), (5 HP), (7.5 HP) 
    Pump Type: Vertical Multistage
    Power Requirement: (480/60/3 V/HZ/PH), (208-230/60/3 V/HZ/PH), (208-230/60/1 V/HZ/PH)
    Inlet Pressure Requirement: Suction Lift or Boost Applications  
    Outlet Pressure: Up to 120 psi (8.3 bar)   
    Outlet Flow: Up to 90 gpm (5.7 lps, 20.4 m3/h)
    Discharge Size: 2" flange fitting standard - 3" and 4" adapters available

    Dimensions

    Concrete Slab Dimensions (min):  65" x 49" (165 cm x 125 cm)  
    Platform Skid Dimensions (min): 53" x 39.75" (135 cm x 101 cm)  
    LP Series – Horizontal End Suction - 1 Pump – Aluminum Enclosure Cabinet Height: (from slab) 35" (89 cm)  
    LP Series – Vertical Multistage – 1 Pump – Aluminum Enclosure Cabinet Height: (from slab) 35" (89 cm) or 47" (107 cm)

    Model Listing

  • Horizontal End Suction - LP Series: 5 to 10 HP; Up to 100 psi (6.9 bar); Up to 200 gpm (12.6 lps, 45.4 m3/h)   
  • Vertical Multistage - LP Series: 1 to 7.5 HP; Up to 120 psi (8.3 bar); Up to 0 gpm (5.7 lps, 20.4 m3/h)

    • Features

    Reliability – Integrated Plug-n-Pump provide single source responsibility for the entire pumping system insuring trouble-free installation and operation  
    Energy efficient – Variable Frequency Drive (VFD) maintains constant pressure at varying flow demand  
    Easy Start-up – All stations are water-tested at the factory prior to shipment.
    Inlet and discharge isolation valves for easier mechanical serviceability
    Mechanical Features
    Inlet Butterfly Isolation Valve  
    Discharge Butterfly Isolation Valve  
    Silent Check Valve
    Pressure / Flow
    Stainless Steel Pressure Transducer  
    Flow Switch
    Enclosures / External Connections
    Polyester Powder Coated Steel Enclosure  
    Polyester Powder-Coated Steel Deck and Piping  
    Re-Prime Piping (Suction Lift only)  
    Thermostat and Fan on Mechanical Enclosure
    Pump Control
    Pump Start Relay  
    VFD - Variable Frequency Drive for Control of Pressure
    Display
    Monochrome Touch Screen Display  
    Optional Color Touch Screen Display with Remote Communication Capability

    Specifications

    D-Series – Horizontal End Suction – 1 Pump – Green Enclosure
    Motor Size: (5 HP), (7 ½ HP), (10 HP), (15 HP), (20 HP)
    Pump Type:Horizontal End Suction
    Power Requirement: (208-230/60/3 V/HZ/PH),  (230/60/1 V/HZ/PH) , (208/60/1 V/HZ/PH)
    Inlet Pressure Requirement: Suction Lift (up to 3 ft. lift), or Boost Applications
    Outlet Pressure: Up to 130 psi (9.0 bar)
    Outlet Flow: Up to 350 gpm (22.1 lps, 79.5 m3/h) 
    Inlet / Discharge: Size: 4" standard - 2", 3" and 6" adapters are external accessories
    D-Series – Vertical Multistage – 1 Pump – Green Enclosure
    Motor Size:  (3 HP), (5 HP), (7 ½ HP), (10 HP), (15 HP)  
    Pump Type: Vertical Multi-Stage
    Power Requirement: (208-230/60/3 V/HZ/PH), (208-230/60/1 V/HZ/PH)
    Inlet Pressure Requirement: Suction Lift or Boost Applications
    Outlet Pressure: Up to 120 psi (8.3 bar) 
    Outlet Flow: Up to 180 gpm (11.4 lps, 40.9 m3/h)
    Inlet / Discharge Size: 4" Standard - 2", 3", and 6" adapters available

    Dimensions

    Concrete Slab Dimensions (min): 90" x 48" (229 cm x 122 cm)
    Platform Skid Dimensions (min): 78" x 36" (198 cm x 91 cm)
    Cabinet Height (from slab): 52" (132 cm) or 64" (163 cm)

    Model Listing

  • Horizontal End Suction - 1 Pump - D Series: 5 to 20 HP; Up to 130 psi (9.0 bar); Up to 180 gpm (11.4 lps, 40.9 m3/h)
  • Vertical Multistage – 1 Pump – D Series: 3 to 15 HP; Up to 120 psi (8.3 bar); Up to 200 gpm (12.6 lps, 45.4 m3/h)

    • Features

    Works with a lawn controller's start/stop command to facilitate the electrical path from the breaker box to the pump motor  
    Provides "pilot duty" operation for all types of electrically driven pump equipment with available coil voltages of 24, 110 or 220 VAC  
    40 AMP certified relay  
    Quick connect terminals with wire nuts  
    Grounding provision      
    Compatible with 24 VAC timed lawn controllers  
    Compatible with 110 or 220 VAC 3/4 HP thru 5 HP* single phase pumps  
    Grey "baked-on" powder coating, for long life in difficult environments  
    UL Listed as "Enclosed Industrial Control Panels" and backed by a one-year warranty  
    Housed in compact NEMA3R weather-tight enclosures  
    Includes an additional ice cube relay for 2-wire controller/decoder systems

    Specifications

    PSR110IC
    Line Voltage: 110 
    Coil Voltage: 24 
    hp: 3/4 through 5
    PSR220IC
    Line Voltage: 220
    Coil Voltage: 24 
    hp: 3/4 through 5

    Dimensions

    6” x 6” x 4” (15.2 cm  x 15.2 cm x 10 cm ) W x H x D

    Model Listing

  • PSR110IC: Line Voltage: 110v, Coil Voltage: 24v, 3/4 through 5hp* 
  • PSR220IC: Line Voltage: 220v, Coil Voltage: 24v, 3/4 through 5hp* 
  • * National Electric cod (nec) states all motors will be thermally protected from excessive "amperage draw." Most motors under 2hp are supplied with thermal protection from the motor manufacturer.

    • Features

    Works with a lawn controller's start/stop command to facilitate the electrical path from the breaker box to the pump motor      
    Provides "pilot duty" operation for all types of electrically driven pump equipment with available coil voltages of 24, 110 and 220 VAC      
    40 AMP certified relay      
    Quick connect terminals with wire nuts  
    Grounding provision      
    Compatible with 24 VAC timed lawn controllers  
    Compatible with 110 or 220 VAC 3/4 HP thru 5 HP single phase pumps  
    Grey "baked-on" powder coating, for long life in difficult environments  
    UL Listed as "Enclosed Industrial Control Panels" and backed by a one-year warranty      
    Housed in compact NEMA3R weather-tight enclosures  
    Not recommended for use with 2-wire controller/decoder systems

    Specifications

    Line Voltage: 110 or 220
    Coil Voltage: 24
    hp: 3/4 through 5

    Dimensions

    6” x 6” x 4” (15.2 cm  x 15.2 cm x 10 cm ) W x H x D 

    Model Listing

  • PSR110220: Line Voltage: 110v, Coil Voltage: 24v, 3/4 through 2hp* 
  • * National Electric cod (nec) states all motors will be thermally protected from excessive "amperage draw." Most motors under 2hp are supplied with thermal protection from the motor manufacturer.

    • Features

    Quick install and fewer points of failure reducing your time on the job and callbacks
    Quick self-priming operation for lawn irrigation *All pumps must be primed (filling the cavity with water) before they are first operated
    Standard 2" Inlet reduces the need for additional pipe adapters and potential points of failure
    115/230 dual voltage motor for maximum flexibility
    Built tough in the USA using a majority of U.S. content
    Heavy-duty cast-iron construction
    Motor featuring capacitor assisted start up and 2 oversized self-lubricating ball bearings for quiet continuous operation
    Chemical and abrasion resistant fiberglass reinforced thermoplastic impeller
    Cool running motor is engineered for continuous operation in ambient temperatures up to 145 F (65c)
    Constructed with ease of maintenance in mind
    4 bolts remove the motor for easy maintenance without disconnecting piping
    Easy access drain plug

    Specifications

    Impeller: Fiberglass reinforced thermoplastic
    Flows To: 66 GPM (250 LPM)
    Inlet and Outlet: 2" FNPT suction port / 1½" FNPT discharge port
    One-year trade warranty
    Motor Specs
    Single Phase
    115/230 dual voltage motor
    60 Hertz
    3,540 RPM
    Max Amps: 230v: 9amps | 115v: 18amps
    Applications
    Well
    Buried Cistern
    Lake and Ditchwater
    Gravity-fed above ground water source
    Boosting municipal water source

    Model Listing

  • BPUMP1HP: 1HP Booster Pump
  • BPUMP1-5HP: 1.5HP Booster Pump

    • Features

    Matches irrigation system operation with the real capacity of the pump station, shortening the water window and decreasing energy consumption
    Alerts the site manager in real time of irrigation and pump station problems via cell phone text message  
    Responds to irrigation system and pump system problems in real time. Other systems can lose an hour of irrigation time trying to recover from a fault

    Model Listing

    Need Help Specifying a Pump?

  • Email pumps@rainbird.com or call 520-806-5620 for assistance with quotes and specifications

    • Copyright © 2023 Rain Bird Corporation. All rights reserved.