Zone Filters & Pressure Regulators

Features

All-in-One Solution
Flow measurement, filtration (100 micron) and 40 psi (2.8 bar) pressure regulation in one compact solution
100% mechanical flow measurement feature provides a cost-effective flow sensing solution for commercial or residential zones
Knowledge That Gives You Control
Audit the proper flow during installation and over time with just a quick glance at the dial
Avoid call backs by addressing valve malfunctions, leaks or clogging before they become a larger issue
Simplifies Maintenance & Installation
Retro-fit model adds flow indication to any Rain Bird Basket Filter model
Provides the accurate available flow rate for each zone simplifying irrigation design and scheduling calculations
Unique upright basket filter design provides easy access for maintenance
Features:
One compact solution provides flow measurement, filtration and pressure regulation (optional)
Solution designed for use in both residential and commercial irrigation systems
The dial at the top of the filter cap indicates the current flow rate of each zone
Indicator bezel may be used to mark the appropriate flow rate for the zone upon install enabling visual identification of variations from potential system issues at any time
Unique upright basket filter design provides easy access for maintenance
Retro-fit model adds flow indication to any Rain Bird Basket Filter model

Specifications

Operating Flow Rate: 3.0 to 20 gpm (11,4 to 75.7 L/m)
Inlet Pressure: 0 to 150 psi (0 to 10,3 bar)
Regulated Outlet Pressure: (select models only): 40 psi (2,8 bar)
Filtration: 150 mesh (100 Micron) stainless steel filter included
Water Temperature: 33°F to 110°F (0,5°C to 43°C)

Dimensions

Height: 6.8" (17.3 cm) Length: 6.5" (16.5 cm) Width: 3.5" (8.8 cm)
Inlet Size = 1”

Model Listing

  • FLOW-100: 1" Flow-Indicating Basket Filter
  • FLOW-100-PRB: 1" Flow-Indicating Basket Filter with Pressure Regulation
  • IFLOW-100-PRB: 1" Flow-Indicating Basket Filter with Pressure Regulation and BSP Threads
  • XCZ-100-FLOW: 1" Commercial Control Zone Kit with Flow Indication
  • FLOW-RETRO: Flow-Indicating Basket Filter Retrofit Kit
  • Replacement Filter Screens:

  • FLOW-120M: 120 mesh (125 microns) stainless steel screen, green
  • FLOW-150M: 150 mesh (100 microns) stainless steel screen, blue
  • FLOW-200M: 200 mesh (75 microns) stainless steel screen, white
  • Features

    Flexibility
    Its high flow range (0.5 gpm to 70 gpm) capacity allows usage in a wide range of applications, making it ideal for drip or spray applications. It can be installed above or below grade.
    - 1” Pressure Regulators flow range: 0.5-35 gpm (1.9 to 132.5 l/min)
    - 1 ½” Pressure Regulator flow range: 15-70 gpm ( 56.8 to 265.0 l/min)
    Reliable Performance:
    Pre-set outlet pressure regulation at either 40 psi (2.8 bar) or 50 psi (3.4 bar) provides worry-free protection for your irrigation installations.
    Durability:
    Tested to meet Rain Bird’s high-quality standards. High Strength ABS construction and stainless steel springs provide the durability to withstand any job.

    Specifications

    Operating Range
    Pressure Regulation:
    PSI-H40X-100: 40 psi (2.8 bar)
    PSI-H50X-100: 50 psi (3.4 bar)
    PSI-H40X-150: 40 psi (2.8 bar)
    Flow Range:
    PSI-H40X-100 & PSI-H50X-100: 0.5 gpm (1.9 l/min) to 35 gpm (132.5 l/min)
    PSI-H40X-150: 1 ½” Female NPT X 1 ½” Female NPT
    Inlet pressure: 15 to150 psi (10.3 bar)

    Dimensions

    PSI-H40X-100 & PSI-H50X-100: 5.8” (14.7 cm) in Length x 2.7” (6.8 cm) in Width
    PSI-H40X-150: 6.3” (16.0 cm) in Length x 3.3” (8.4 cm) in Width

    Model Listing

  • PSI-H40X-100: 1" 40 psi inline Pressure Regulator
  • PSI-H50X-100: 1" 50 psi inline Pressure Regulator
  • PSI- H40X-150: 1½" 40 psi inline Pressure Regulator
  • Features

    Regulates outlet pressure to 30 psi, can be installed above or below ground.
    Preset outlet pressure: 30 psi (2.0 bar)
    Tested to meet Rain Bird’s high-quality standards. High Strength ABS construction and stainless steel springs provide the durability to withstand any job.

    Specifications

    Operating Range
    PSI-M30X-075: 30 psi (2.1 bar)
    Flow Range:
    PSI-M30X-075: 2.0 to 10.0 gpm; 120 to 600 gph (7.8 to 37.9 l/m)

    Dimensions

    PSI-M30X-075: 3⁄4" NPT female-threaded inlet and outlet

    Model Listing

  •     PSI-M30X-075: 3⁄4" 30 psi (2.1 bar) regulator for medium flow    
  • Features

    A simple and reliable filter for low-volume irrigation systems
    Simple to clean, as cap has a sealing O-ring and unthreads to provide access to the stainless steel filter element
    Strong and reliable due to its robust design and glass-filled polypropylene construction
    Male x Male threaded connections for direct connection to valves and pressure regulators
    Replacement stainless steel elements are available in 200 mesh (75 micron)

    Specifications

    Operating Range
    Flow:    
    ¾" units: 0.20 to 12.0 gpm (0.8 to 45.4 l/m)
    1" units: 0.20 to 18.0 gpm (0.8 to 68.1 l/m)
    Pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Filtration: 200 mesh (75 micron)
    Note: Filter must be installed downstream of a control valve and not under constant pressure.

    Model Listing

  • RBY075MPTX: ¾" Inline RBY Filter with 200 Mesh Screen
  • RBY100MPTX: 1" Inline RBY Filter with 200 Mesh Screen
  • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)
  • Features

    Provides extra large filtration capacity for residential, commercial, and municipal applications
    Durable filters can be easily removed for cleaning, significantly reducing cleaning time
    Disc filters can decompress for easy cleaning
    Auxiliary connection with a threaded cap can be drilled to allow draining or depressurization

    Specifications

    Operating Range
    1” Model: Maximum flow: Up to 26 gpm (6 m3/hr)
    -Filtering surface (disc): 28 in2 (180cm2)
    1.5” Models: Maximum flow: Up to 62 gpm (14 m3/hr)
    -Filtering surface (disc): 48 in2 (310 cm2)
    -Filtering surface (screen): 42 in2 (270 cm2)
    2” Models: Maximum flow: Up to 110 gpm (25 m3/hr)
    -Filtering surface (disc): 81 in2 (525 cm2)
    -Filtering surface (screen): 75 in2 (485 cm2)
    Maximum Pressure: 116 psi (8 bar)
    Maximum Temperature: Up to 140° F (60° C)
    Filtration
    Stainless Steel Screen Filter: 120 Mesh (130 Micron)*
    Plastic Filter Discs: 120 Mesh (130 Micron
    * Screen not available in 1” model

    Dimensions

    1": (6.8" H x 7.5" W x 3.3" D)
    1.5": (9.5"H x 10.3"W x 5.7" D)
    2": (9.7"H x 10.6" W x 5.7"D) 

    Model Listing

  • LCRBY100D: 1” Large-Capacity Disc Filter
  • LCRBY150S: 1.5” Large-Capacity Screen Filter
  • LCRBY150D: 1.5” Large-Capacity Disc Filter
  • LCRBY200S: 2” Large-Capacity Screen Filter
  • LCRBY200D: 2” Large-Capacity Disc Filter
  • Replacement Filters

  • LGFC120MD: Disc
  • LGFC120MS: Screen
  • Features

    Reduces maintenance and labor costs - 40% larger filter surface than standard filters means less frequent cleaning
    Provides increased reliability – “No Spill” feature ensures dirt does not fall back into the filter during cleanup operation
    Simplifies installation and maintenance – threaded top with 0-ring makes it easy to remove and clean that stainless steel filter screen
    Efficient design – combines filtration and pressure regulation in one compact unit with fewer connections
    Available in 1" model
    Comes pre-assembled with 200 mesh (75 micron) stainless steel screen (other screen sizes available)
      Built-in 40 psi (2,7 bar) pressure regulator
    Also available in Light Commercial Control Zone Kits:
    XCZ-100-PRBR (without Quick-Check feature)
    XCZ-100-PRB-LC (without Quick-Check feature)
    XCZ-PRB-100-COM (with Quick-Check)
    XCZ-PRB-150-COM (with Quick-Check)

    Specifications

    Operating Range
    Flow: 0.3 to 20 gpm (18.9 to 75.7 l/m)
    Inlet Pressure: 15 to 150 psi (1,0 to 10,3 bar)
    Regulating Pressure: 40 psi (2,7 bar)
    Filtration: 200 mesh (75 micron) stainless steel
    Temperature: Up to 150 degree F (66 degree C)
    Note: When installing with the emission points more than 5 feet above the pressure regulating filter, a check valve should be installed after the regulator.
    Models
    PRB-100: 1” Basket Filter with built-in Pressure Regulator (40 psi ) and 200 mesh (75 micron) stainless steel screen
    PRB-QKCHK-100: 1" Basket Filter with built-in Pressure Regulator (40 psi) and 200 mesh (75 micron) stainless steel screen
    Replacement Filter Screens
    QKCHK-100M: 100 mesh stainless steel screen, red
    QKCHK-200M: 200 mesh stainless steel screen, white
    Replacement Cap
    QKCHKCAP: (Complete cap with body o-ring)

    Features

    Reduces the number of components in a control zone, making it smaller and easier to install. More control zones can fit in one valve box
    Combination unit comes with 200 mesh (75 micron) stainless steel reduces the number of connections, making installation easier and faster
    Static RBY filter regulates pressure to a nominal 30 or 40 psi (2.0 or 2.8 bar) - PR RBY Filter Cap has sealing O-ring and unthreads to provide access to the filter element for easy cleaning
    30 or 40 psi pressure regulator is integrated into the filter body
    Robust body and cap are made of glass-filled polypropylene and provide 150 psi (10.3 bar) pressure rating

    Specifications

    Operating Range
    Flow:  
     ¾" units: 0.20 to 5.0 gpm (0.8 to 18.9 l/m)
    1" units: 3.0 to 15.0 gpm (11.4 to 56.8 l/m)
    Inlet pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Regulated pressure:
    3⁄4" units: 30 psi (2.1 bar)
    1" units: 40 psi (2.8 bar)
    Note: When installing with emission points more than 5 ft. above the pressure regulating filter, a check valve should be installed after the regulator.
    Note: Filter must be installed downstream of a control valve and not under constant pressure.

    Model Listing

  • PRF-075-RBY: 3⁄4" PR RBY Filter
  • PRF-100-RBY: 1" PR RBY Filter
  • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)
  • Features

    Reduces maintenance and labor costs — the indicator tells you when to clean the filter, taking the guesswork out of cleaning the filter
    Provides increased reliability – “No-spill” feature ensures dirt does not fall back into the filter during cleanup operation
    Simplifies installation and maintenance - threaded top with O-ring makes it easy to remove and clean the screen
    Available in 1" model
    Comes pre-assembled with 200 mesh (75 micron) stainless steel screen (other screen sizes available)

    Specifications

    Operating Range
    Flow: 0.3 to 20.0 gpm (11.4 to 75.7 l/m)  
    Pressure: 0-150 psi (0 to 10.3 bar)

    Model Listing

  • QKCHK-100*: 1" Basket Filter with 200 mesh stainless steel screen
  • * Available with BSP threads
  • Replacement Filter Screens

  • QKCHK-100M: 100 mesh screen, red
  • QKCHK-200M: 200 mesh stainless steel screen, white
  • Replacement Cap

  • QKCHKCAP: (Complete cap with body o-ring
  • Features

    Provides convenient 30 psi (2.1 bar) pressure regulation at the riser for any ½" FPT emission device or compression adapter
    Can be installed above or below grade
    Can be used with Xeri-bird™ 8 Multi-Outlet Emission Device (see page 121)

    Specifications

    Operating Range
    Flow: 0.50 to 4.00 gpm; 30 to 240 gph (1.9 to 15.1 l/m)
    Inlet Pressure: 15 to 70 psi (1.0 to 4.8 bar)

    Dimensions

    1⁄2" female-threaded inlet
    Height: 4" (10 cm)

    Model Listing

  • PRS-050-30: 1/2" Retrofit Pressure Regulator
  • Features

    Permits convenient conversion to drip tubing when used with barbed adapter
    Provides 30 psi (2,0 Bars) pressure regulation and a 200-mesh (75 micron) screen that is easily accessible
    Supports flow rates of 0.5 to 6 gpm
    Internal assembly drops into any 1804 spray head body to easily retrofit existing system to Xerigation® products
    Comes with 1 low profile Barb Tee and 1 Elbow Fitting
    Includes (1) ½” FPT x Elbow Fitting and (1) ½” FPT x Tee Fitting for easy connection to drip tubing

    Specifications

    Operating Range
    Flow: 0.5 to 6 gpm (0.11 to 1.36 l/m)
    Inlet pressure: 15 to 70 psi (1.0 to 4.8 bar)
    Regulated pressure: 30 psi (2.1 bar)
    Filtration: 200 mesh (75 micron)

    Dimensions

    ½" (15/21) female-threaded inlet
    ½" (15/21) male-threaded swivel outlet
    Width: Cap: 2.25” (5.70 cm) Body: 1.5” (3.80cm)

    Model Listing

  • 1800-RETRO: 1800 Series Spray Body Retrofit Assembly
  • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)