Specification Home
Products

Spray Sprinkler Bodies

Spray Nozzles

Rotors & Impacts

Valves & Valve Boxes

Controllers

Central Control

Drip

Drainage

Pumps & Filters

Industry Certified Products

Documentation

CAD & Drawings

Design Guides

Performance Charts

Design Resources

Pressure Loss Tables

Regulation

Training

LEED Products

Features

Best-in-Class Valves
With industry-leading reliability and performance, the Rain Bird EFB-CP Series of commercial valves are now even better with preinstalled IVM-SOL
Next Generation Two-Wire System
The ESP-LXIVM Two-Wire Controller is the next leap forward—simplifying installation, improving reliability and enabling more troubleshooting features that save time
Performance and Reliability
With 50% fewer connections, an IVM Smart Valve is already 200% more reliable out of the box versus using a valve and decoder
Features
Reliable performance even in dirty water applications. Self-flushing filter resists debris build-up
Rugged red brass construction for longer life
Normally closed, reverse flow design ensures valve will fail in the closed position if a tear or rip in the diaphragm occurs. Prevents flooding, water waste and landscape damage
Slow closing to prevent water hammer and subsequent system damage
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service
Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning on the controller
Manual external bleed permits flushing debris from the system. Recommended for system start up and other repairs
Contamination-proof, self-flushing filter screen resists debris build-up. Water flow continuously flushes the screen, dislodging particles and debris before they can accumulate and clog the filter
Reclaimed water compatible: all models now feature EPDM diaphragms and chlorine-resistant parts as standard equipment
Options (order separately)
Accommodates optional, field installed PRS-D pressure regulating module to ensure optimum sprinkler performance
Optional purple flow control handle for non-potable water applications: P/N 236927, IVMEFBHANB

Specifications

Pressure: 15 to 200 psi (1.04 to 13.80 bar)
Flow with/without PRS-D: 5 to 200 GPM (1.14 to 45.40 m3/h; 0.32 to 12.60 l/s)
Temperature: up to 150° F (66° C)
Electrical Specifications
Power: 26.5 Vrms 50/60 Hz (cycles/sec)
Inrush current: <40mA (Peak)
Quiescent current: <0.4mA (ave.)
Voltage Range: 15.6 - 29.2 Vrms
Compatible with LXIVM controllers
Dimensions (H x L x W)
IVM100EFB: 6" x 4½" x 3¼" (8.3 cm) x (15.2 cm) x (11.4 cm) H x L x W
IVM150EFB: 6 ½" x 5½" x 4½" (11.4 cm) x (16.5 cm) x (14 cm) H x L x W
IVM200EFB: 7" x 6¾" x 5¾" (14.6 cm) x (17.8 cm) x (17.1 cm) H x L x W

Model Listing

  • IVM100EFB: 1" Brass Valve with IVM-SOL
  • IVM150EFB: 1½" Brass Valve with IVM-SOL
  • IVM200EFB: 2" Brass Valve with IVM-SOL

    • Features

    Reliable Control Zone Kits that include the Low Flow Valve, the only valve on the market that can handle low flows (below 3 gpm) without weeping
    Complete, two-piece Control Zone Kits include the field-proven Low Flow Anti-Siphon Valve that has an atmospheric vacuum breaker for backflow prevention and an IAPMO rating
    These PR Filter kits provide on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system

    Specifications

    Operating Range
    Flow: 0.20 to 5.0 gpm (0.8 to 18.9 l/m)
    Inlet pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Filtration: 200 mesh stainless steel screen (75 micron)
    Regulated pressure: 30 psi (2.1 bar)
    Installation Note:
    When installing indoors or on a design where the emission points are more than 5ft. above the Control Zone Kit, you must install a check valve after the pressure regulating filter (RBY or Basket Filter).  The regulator has a permeable white dot that is designed to relieve excess pressure by slowly releasing water droplets.
    Filter must be installed downstream of any valve; warranty will be void if installed under constant pressure.

    Dimensions

    XACZ-075-PRF: 14" Height

    Model Listing

  • XACZ-075-PRF: 3⁄4" Low Flow Anti-Siphon Valve with 3⁄4" PR RBY Filter

    • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)

    • Features

    Reliable Control Zone Kits that include the Low Flow Valve, the only valve on the market that can handle low flows (below 3 gpm) without weeping
    Shorter kits with only two components (valve plus pressure-regulating filter) mean that you can fit more Control Zone Kits in a valve box, saving time and money
    These PR Filter kits provide on/off control, filtration, and pressure regulation with fewer components; so there is less chance of leakage at the connections, both at installation and over the life of the system

    Specifications

    Operating Range
    Flow:  XCZ-075-PRF: 0.2 to 5.0 gpm; (0.8 to 18.91 l/m) XCZ-LF-100-PRF: 0.2 to 10.0 gpm; (0.8 to 37.85 l/m)  
    Inlet pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Regulated pressure:   XCZ-075-PRF - 30psi (2.1 bar) XCZ-LF-100-PRF - 40 psi (2.8 bar)
    Filtration: 200 mesh stainless steel screen (75 micron)Models

    Dimensions

    XCZ-075-PRF: 10" Length
    XCZLF-100-PRF: 10" Length

    Model Listing

  • XCZ-075-PRF: ¾" Low Flow Valve with ¾" PR RBY Filter (Assembled)
  • Flow: 0.2 to 5.0 gpm (0.8 to 18.91 l/m)
  • XCZLF-100-PRF: 1" Low Flow Valve with 1" PR RBY Filter (Assembled)
  • Flow: 0.2 to 10.0 gpm (0.8 to 37.85 l/m)

    • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)

    • Features

    XCZPGA-100-PRF
    Reliable Control Zone Kit that includes an extra durable PGA valve
    These PR Filter kits provide on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system
    2-wire compatible residential Control Zone Kit
    XCZ-100-PRF
    Shorter kits with only two components (valve plus pressure-regulating filter) mean that you can fit more Control Zone Kits in a valve box, saving time and money
    These PR Filter kits provide on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system

    Specifications

    Operating Range
    Flow: 3 to 15 gpm (11.4 to 56.8 l/m)
    Inlet pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Filtration: 200 mesh stainless steel screen (75 micron)
    Regulated pressure: 40 psi (2.8 bar)
    Installation Note:
    When installing indoors or on a design where the emission points are more than 5ft. above the Control Zone Kit, you must install a check valve after the pressure regulating filter (RBY or Basket Filter).  The regulator has a permeable white dot that is designed to relieve excess pressure by slowly releasing water droplets.
    Filter must be installed downstream of any valve; warranty will be void if installed under constant pressure.

    Model Listing

  • XCZPGA-100-PRF: 1" PGA Valve with 1" PR Filter  

  • XCZ-100-PRF: 1" DV Valve with 1" PR Filter (Assembled)*
  • *Available with BSP threads

    • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)

    • Features

    1/2" & 3/4" blank tubing extruded from polyethylene resin materials for consistent durability
    ½” and ¾” blank drip distribution tubing extruded from a proprietary blend of polyethylene resins
    Ultra protection from heat exposure and ultraviolet radiation
    Thicker tubing wall for added toughness and kink resistance
    Black jacket to blend in with landscapes
    Available in 250’ and 500’ coils
    Available with 3 different colored stripes to differentiate zones

    Specifications

    Operating Range
    Water: Up to 110°F (43.33° C)
    Ambient: Up to 125°F (51.7° C)
    Pressure: 0 to 60 psi (0 to 4.1 bar)
    Specifications – 700 Series (1/2”)
    Outside Diameter: 0.700” (17.8 mm)
    Inside Diameter: 0.590” (15 mm)
    Wall Thickness: 0.055” (1.4 mm)
    Tubing Color: Black
    Compatible with Rain Bird TLF 600 Series Fittings
    Specifications – 710 Series (1/2”)
    Outside Diameter: 0.710” (18 mm)
    Inside Diameter: 0.600” (15.2 mm)
    Wall Thickness: 0.055” (1.4 mm)
    Tubing Color: Black
    Compatible with Rain Bird TLF 600 Series Fittings
    Specifications – 940 Series (3/4”)
    Outside Diameter: 0.940” (23.9 mm)
    Inside Diameter: 0.820” (20.8 mm)
    Wall Thickness: 0.060” (1.5 mm)
    Tubing Color: Black
    Compatible with Rain Bird TLF 800 Series Fittings

    Model Listing

    UltraXP – 700 Series (1/2”)

  • UXP700250: No Stripe, 250 ft. (76m) coil
  • UXP700500: No Stripe, 500 ft. (152m) coil
  • UXP700G250: Green Stripe, 250 ft. (76m) coil
  • UXP700G500: Green Stripe, 500 ft. (152m) coil

    • UltraXP – 710 Series (1/2”)

  • UXP710250: No Stripe, 250 ft. (76m) coil
  • UXP710500: No Stripe, 500 ft. (152m) coil
  • UXP710G250: Green Stripe, 250 ft. (76m) coil
  • UXP710G500: Green Stripe, 500 ft. (152m) coil
  • UXP710P250: Purple Stripe, 250 ft. (76m) coil
  • UXP710P500: Purple Stripe, 500 ft. (152m) coil

    • UltraXP – 940 Series (3/4”)

  • UXP940G500: Green Stripe, 500 ft. (152m) coil
  • UXP940P500: Purple Stripe, 500 ft. (152m) coil

    • Features

    Industry wide flow range between 0.3 and 20 gpm (1.13 to 75.71 l/m) leading enables single SKU purchase for large projects
    Updated with the reliable, flexible and proven PEB valve with the rugged pressure regulating basket filter
    This PR Filter kit provides on/off control, filtration, and pressure regulation with only two parts; so there is less chance of leakage at the connections, both at installation and over the life of the system
    The “No Spill” feature of the basket filter ensures dirt does not fall back into the filter during cleanup operation. The threaded filter top with 0-ring makes it easy to remove and clean that stainless steel filter screen

    Specifications

    Operating Range
    Flow: 0.3 to 20 gpm (1.13 to 75.71 l/m)*
    Inlet Pressure: 15 to 150 psi (1,0 to 10,3 bar)
    Regulating Pressure: 40 psi (2,7 bar)
    Filtration: 200 mesh (75 micron) stainless steel
    Temperature: Up to 150 degree F (66 degree C)
    *For flows below 5 gpm Rain Bird recommends the use of upstream filtration to prevent debris from collecting below the diaphragm

    Model Listing

  • XCZ-100-PRB-LC: 1” PEB Valve with 1” Pressure Regulating (40 psi), Basket Filter

    • Replacement Filter Screens

  • QKCHK-100M: 100 mesh stainless steel screen, red
  • QKCHK-200M: 200 mesh stainless steel screen, white

    • Replacement Cap

  • BFCAP: (Complete cap with body o-ring)

    • Features

    Complete kit is the simplest, smallest and most reliable Control Zone Kit for commercial applications between 0.3 and 20 gpm (1.13 and 76 l/m)
    Includes the reliable, proven PESB Valve which provides patented scrubbing action, making this kit ideal for commercial dirty water applications
    Includes the Pressure Regulating, Quick-Check Basket Filter that has a clear indicator which goes from green to red, telling you when to clean the filter. This reduces maintenance and takes the guesswork out of cleaning the filter. In addition, the threaded top makes it easy to remove and clean the stainless steel screen
    Basket Filter and Pressure Regulator have been combined for one smaller Pressure Regulating, Quick-Check Basket filter that is 24% smaller than the previous unit

    Specifications

    Operating Range
    Operating Flow Range**: 0.3 to 20.0 gpm (1.13 to 75.7 l/m)*
    Inlet Pressure: 15 to 150 psi (1,0 to 10,3 bar)
    Regulating Pressure: 40 psi (2,8 bar)
    Filtration:  XCZ-100-PRBLC: Basket Filter; 200 mesh (75 micron) XCZ-100-PRBR: Basket Filter; 200 mesh (75 micron) XCZ-100-PRBCOM: Quick-Check Basket Filter; 200 mesh (75 micron)
    Temperature: Up to 150º F (66º C)
    * For flows below 5gpm Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm

    Model Listing

  • XCZ-100-PRB-COM: 1" Ball Valve with 1" PESB Valve and 1" Pressure Regulating (40 psi), Quick-Check Basket Filter
  • XCZ-100-PRBR: 1" PESBR Valve and 1" Pressure Regulating (40psi) Basket Filter

    • Replacement Screens

  • FLOW120M: (120 mesh/125 micron stainless steel screen)
  • FLOW150M: (150 mesh/100 micron stainless steel screen)
  • FLOW200M: (200 mesh/75 micron stainless steel screen)

    • Replacement Cap

  • QKCHKCAP: (Complete cap with body o-ring

    • Features

    1/2" & 3/4" blank tubing extruded from polyethylene resin materials for consistent durability
    1/2" tubing is now available in two different sizes: 0.600" I.D. X 0.700" O.D. and 0.615" I.D. X 0.705" O.D.
    UV-resistant for installations at or below grad
    Compact coils for easy storage and shipping

    Specifications

    Operating Range
    Pressure: 0 to 60 psi (0 to 4.1 bar)

    Model Listing

    XBS 700 - ½" Tubing Models - 600-700

  • Outside diameter: 0.700" (17.8 mm)
  • Inside diameter: 0.600" (15.2 mm)
  • Wall thickness: 0.050" (1.3 mm
  • XBS700G500: 1/2" tubing, 500 foot (152 m) coil

    • XBS - ½" Tubing Models

  • Outside diameter: 0.705" (18 mm)
  • Inside diameter: 0.615" (15.6 mm)
  • Wall thickness: 0.045" (1.2 mm)
  • XBS100: 1/2" tubing, 100 foot (30 m) coil
  • XBS500: 1/2" tubing, 500 foot (152 m) coil

    • XBS 940 - ¾" Tubing Models

  • Outside diameter: 0.940" (24 mm)
  • Inside diameter: 0.820" (21 mm)
  • Wall thickness: 0.060" (1.5 mm
  • XBS940G500: 3/4" tubing, 500 foot (152 m) coil
  • XBS940P500: 3/4" tubing, 500 foot (152 m) coil
  • Note: XBS 940 is also available in 100’ coils

    • Features

    Oversized wiper seal prevents leaks and protects internals from debris
    Rain Curtain™ nozzles deliver even distribution over the entire radius including large wind resistant droplets and gentle close-in watering resulting in greener turf using less water
    A history of proven performance and reliability tested in millions of installations
    Self-flushing arc adjustment port that prevents buildup of debris
    5 year trade warranty

    Specifications

    Precipitation rate: 0.20 to 1.50 in/hr (5 to 38 mm/h)
    Radius: 25 to 50 feet (7.6 to 15.2 m)
    Radius may be reduced up to 25% with radius reduction screw
    Pressure: 25 to 65 psi (1.7 to 4.5 bar)
    Flow Rate: 0.76 to 9.63 gpm (3.0 to 36.6 l/m; 0.17 to 2.19 m3/h)
    Reversing full- and part-circle adjustment from 40° - 360°
    Standard nozzle trajectory of 25°. Low angle nozzle trajectory of 10°. MPR nozzles varied nozzle trajectory between 12° - 25°.
    Optional Features
    Plus (+) Flow shutoff: “The Green Top.” Reduce downtime on jobs by flushing and nozzling rotors without running back and forth to the controller or valves
    PRS (R) with flow optimizer technology: The 45 psi pressure regulator lowers water bills, provides exact flow of each rotor, equalizes lateral lines, and eliminates misting and fogging
    SAM Seal-A-Matic™ check valve: holds up to 7 feet (2.1 m) of elevation change
    Stainless steel (SS) riser: helps deter vandalism on public turf areas (available on 4 and 6" models)
    Purple cover (NP) :for non-potable systems

    Dimensions

    Pop-up height: Shrub; 4" (10,2 cm); 6" (15,2 cm); 12" (30,5 cm)
    Overall body height: Shrub: 7 3/4" (19,7cm) 4": 7 3/8" (18, 5 cm); 6": 9 5/8" (24,5 cm); 12": 16 7/8" (42,9 cm)
    Exposed surface diameter: 1 5/8" (4,1 cm)

    Model Listing

    Shrub Models:

  • 5000SPCSAM: Shrub Part Circle SAM
  • 5000+SPCSAM: Shrub Plus Part Circle SAM
  • 5000+SPCSAMNP: Shrub Plus Part Circle SAM Non Potable
  • 5000+SPCSAMR: Shrub Plus PRS Part Circle SAM
  • 5000+SPCSAMRN: Shrub Plus PRS Part Circle SAM Non Potable

    • 4" Part Circle (adjustable from 40° –360°):

  • 5004PC: 4" Part Circle
  • 5004PC20: 4" Part Circle w/2.0 Nozzle
  • 5004PC30: 4" Part Circle w/3.0 Nozzle
  • 5004PCSAM: 4" Part Circle SAM
  • 5004PCSAM20: 4" Part Circle SAM w/2.0 Nozzle
  • 5004PCNP: 4" Part Circle Non Potable
  • 5004+PC: 4" Plus Part Circle
  • 5004+PC20: 4" Plus Part Circle w/2.0 Nozzle
  • 5004+PC30: 4" Plus Part Circle w/3.0 Nozzle
  • 5004+PCSAM: 4" Plus Part Circle SAM
  • 5004+PCR: 4" Plus Part Circle PRS
  • 5004+PCSAMR: 4" Plus Part Circle SAM PRS
  • 5004+PCSAMR20: 4" Plus Part Circle SAM PRS w/2.0 Nozzle
  • 5004+PCSAMR30: 4" Plus Part Circle SAM PRS w/3.0 Nozzle
  • 5004+PCSAMRNP: 4" Plus Part Circle SAM PRS Non Potable
  • 5004+PCSAMRSS: 4" Plus Part Circle SAM PRS Stainless Steel
  • 5004+PCSAMRNS: 4" Plus Part Circle SAM PRS Stainless Steel Non Potable

    • 4" Full Circle (360 degrees only):

  • 5004FC: 4" Full Circle
  • 5004+FC: 4" Plus Full Circle
  • 5004+FCSAM: 4" Plus Full Circle SAM
  • 5004+FCSAMR: 4" Plus Full Circle SAM PRS
  • 5004+FCSAMRSS: 4" Plus Full Circle Stainless Steel SAM PRS

    • 6" Part Circle (adjustable from 40° –360°):

  • 5006PC: 6" Part Circle
  • 5006PC30: 6" Part Circle w/ 3.0 Nozzle
  • 5006+PC: 6" Plus Part Circle
  • 5006+PCSAM: 6" Plus Part Circle SAM
  • 5006+PCSAMNP: 6" Plus Part Circle SAM Non Potable
  • 5006+PCSAMR: 6" Plus Part Circle SAM PRS
  • 5006+PCSAMRNP: 6" Plus Part Circle SAM PRS Non Potable
  • 5006+PCSAMRSS: 6" Plus Part Circle SAM PRS Stainless Steel
  • 5006+PCSAMRNS: 6" Plus Part Circle SAM PRS Stainless Steel Non Potable

    • 12" Part Circle (adjustable from 40° –360°):

  • 5012+PCSAMR: 12" Plus Part Circle SAM PRS
  • 5012+PCSAMRNP: 12" Plus Part Circle SAM PRS Non Potable

    • Features

    Vandal resistance, brass reinforced turret for increased side impact durability
    Memory Arc® returns the rotor to its original arc setting
    Non-strippable drive mechanism prevents damage from vandals
    Easy, wet, dry arc adjustment with slotted screwdriver through top of rotor from 50° to 330° part-circle, 360° non-reversing full-circle. Full and part circle operation in one unit
    Left and right side trips adjustable for ease of installation without turning the case and loosening the pipe connection
    SAM Seal-A-Matic check valve
    3-port, color-coded Rain Curtain nozzles for optimal long-range, midrange, and close-in watering
    5 year warranty

    Specifications

    Radius: 39 to 81 feet (11.9 to 24.7 m)
    Precipitation rate: 0.48 to 1.23 inches per hour (12 to 31 mm/h)
    Pressure: 50 to 100 psi (3.5 to 6.9 bar)
    Flow: 3.8 to 36.3 gpm (0.86 to 8.24 m3/h; 14.4 to 137.4 l/m)
    1" NPT or BSP female threaded inlet
    SAM Seal-A-Matic™ check valve holds up to 10 feet (3.1 m) of elevation change
    Nozzle outlet trajectory is 25º
    Rain Curtain™ Nozzles: Included with rotor, other sizes available upon request; 10-grey, 12-beige, 14-light green, 16-dark brown, 18-dark blue
    Optional Features:
    Stainless steel (SS) riser helps deter vandalism on public turf areas
    Purple cover (NP) for non-potable systems
    Optional Sod Cup

    Dimensions

    Exposed diameter: 1 7/8" (4,8 cm)
    Overall diameter: 3 1/8" (7,9 cm)
    Overall height: 10 1/8" (25,7 cm)
    Pop-up height: 5" (12,7 cm)
    Note: Pop-up height is measured from cover to the primary nozzle port. Overall body height is measured popped down

    Model Listing

  • 8005: 1" NPT female threaded inlet
  • 8005-NP: 1" NPT female threaded inlet; non-potable cover
  • 8005-SS: 1" NPT female threaded inlet; stainless steel
  • 8005-NP-SS: 1" NPT female threaded inlet; stainless steel and non-potable cover

    • Nozzle Kits:

  • B81610: Low Flow Kit
  • B81620: Standard Flow Kit
  • B81630: High Flow Kit

    • Features

    Ratcheting stem just like standard spray bodies
    3-port, color-coded Rain Curtain nozzles for optimal long range,midrange, and close-in watering
    SAM Seal-A-Matic check valve
    Heavy-duty, stainless steel retract spring ensures positive pop-down
    5 year warranty

    Specifications

    Precipitation Rate: 0.37 to 1.31 inches per hour (9 to 33 mm/h)
    Radius: 39 to 65 feet (11,9 to 19,8 m)
    Pressure: 30 to 90 psi (2,1 to 6,2 Bars)
    Flow: 2.9 to 21.7 GPM (0,66 to 4,93 m3/h; 0,18 to 1,37 l/s)
    Rain Curtain™ Nozzles: Included with rotor, other sizes available upon request; 10-grey, 12-beige, 14-light green, 16-dark brown, 18-dark blue
    1" (26/34) female NPT or BSP threaded inlet
    SAM check device holds up to 10 feet (3,1 m) of elevation change
    Nozzle outlet trajectory is 25°
    Optional Features:
    Stainless steel (SS) riser helps deter vandalism on public turf areas
    Purple cover (NP) for non-potable systems

    Dimensions

    Overall height: 8 1/2" (21,6 cm)
    Pop-up height: 4" (10,2 cm)
    Exposed surface diameter: 2" (5,1 cm)
    Note: Pop-up height measured from the cover to center of nozzle. Overall body height is measured popped down

    Model Listing

    4" Part Circle:

  • 6504-PC: Part-circle
  • 6504-PC-NP: Part-circle, non-potable cover
  • 6504-PC-SS: Part-circle, stainless steel
  • 6504-PC-SS-NP: Part-circle, stainless steel, non-potable cover

    • 4" Full Circle:

  • 6504-FC: Full-circle
  • 6504-FC-NP: Full-circle, non-potable cover
  • 6504-FC-SS: Full-circle, stainless steel
  • 6504-FC-SS-NP: Full-circle, stainless steel, non-potable cover

    • Nozzle Kits:

  • B81610: Low Flow Kit
  • B81620: Standard Flow Kit

    • Features

    The Ultimate Protection for both Potable and Non-Potable Markets
    The RD1800 Series has been built to withstand harsh operating conditions such as chemically treated recycled water (reclaimed / nonpotable), dirty water containing grit, debris, and other particulates, and high operating pressures common in commercial irrigation systems.
    Non-potable models add an extra level of defense against the chlorine and chemicals found in recycled water, and feature a purple seal with the international "Do Not Drink" symbol and warnings in English and Spanish
    Benefits
    Patented, Triple-Blade Wiper Seal precisely balances flushing, flow-by and debris protection to optimize performance and durability at pop-up and retraction. Precision-controlled flushing at pop-up and retraction clears debris, ensuring positive stem retraction
    Unique debris pockets hold grit in place, removing it from circulation and preventing long-term damage. Parts are resistant to corrosion in treated recycled water containing chlorine
    SAM PRS Models: Incorporates all RD1800 Series SAM and PRS features. Meets the needs of all spray areas, regardless of changing elevation or water pressures
    Flow-Shield™ Models: Provides low flow vertical water jet visible from +200’ line of sight when a nozzle has been removed
    Non-Potable Water Models: Provides an alternative to clip-on caps and molded purple covers. Easy-to-read English “DO NOT DRINK”, Spanish “NO BEBA” warnings, and international 'Do Not Drink' symbol

    Specifications

    Spacing: 2.5 to 24 feet (0.8 to 7.3 m)
    Pressure: 15 to 100 psi (1.0 to 6.9 bar)
    SAM capability: Holds up to 14 feet (4.2 m) of head; 6 psi (0.3 bar)
    Flow-by SAM Models: 0 at 15 psi (1.0 bar) or greater; 0.5 gpm (0.1 m³/h; 0.03 l/s)
    Flow-by All Other Models: 0 at 10 psi (0.7 bar) or greater; 0.5 gpm (0.1 m³/h; 0.03 l/s)
    SAM-PRS models regulate nozzle pressure to an average 30 or 45 psi (2.1 or 3.1 bar) with inlet pressures of up to 100 psi (6.9 bar)
    Side inlets featured on non Seal-A-Matic™ (SAM) models only
    Five-year trade warranty

    Dimensions

    ½" (15/21) NPT female threaded inlet

    How to Specify

    RD1800 How To Specify

    Model Listing

    Base Models:

  • RD04-NP: 4" (10cm) pop-up height, Non-Potable
  • RD12-NP: 12" (30.5cm) pop-up height, Non-Potable

    • SAM PRS-30 Models:

  • RD04-S-P-30-NP: 4" (10cm) pop-up height, Non-potable
  • RD06-S-P-30-NP: 6" (15cm) pop-up height, Non-potable
  • RD12-S-P-30-NP: 12" (30.5cm) pop-up height, Non-potable

    • SAM PRS-30 & Flow-Shield™ Models:

  • RD04-S-P-30-F: 4" (10cm) pop-up height
  • RD04-S-P-30-F-N: 4" (10cm) pop-up height, Non-potable
  • RD06-S-P-30-F: 6" (15cm) pop-up height
  • RD06-S-P-30-F-N: 6" (15cm), Non-potable
  • RD12-S-P-30-F: 12" (30.5cm) pop-up height
  • RD12-S-P-30-F-N: 12" (30.5cm), Non-potable

    • SAM PRS-45 Models:

  • RD04-S-P-45-NP: 4" (10cm) pop-up height, Non-potable
  • RD06-S-P-45-NP: 6" (15cm) pop-up height, Non-potable
  • RD12-S-P-45-NP: 12" (30.5cm) pop-up height, Non-potable

    • SAM PRS-45 & Flow-Shield™ Models:

  • RD04-S-P-45-F: 4" (10cm) pop-up height
  • RD04-S-P-45-F-N: 4" (10cm) pop-up height, Non-potable
  • RD06-S-P-45-F: 6" (15cm) pop-up height
  • RD06-S-P-45-F-N: 6" (15cm) pop-up height, Non-potable
  • RD12-S-P-45-F: 12" (30.5cm) pop-up height
  • RD12-S-P-45-F-N: 12" (30.5cm) pop-up height, Non-potable

    • Features

    Simple
    Rain Bird’s patent-pending 4.3 psi check valve technology keeps the dripline charged with water at all times, increasing uniformity of watering, and conserves water by eliminating the need to recharge the line at the beginning of each watering cycle
    XFS-CV Sub-Surface Dripline emitters are protected from root intrusion by Rain Bird’s patent-pending Copper Shield™ Technology resulting in a system that does not require maintenance or replacement of chemicals to prevent root intrusion
    Rain Bird’s low-profile emitter design reduces in-line pressure loss, allowing longer lateral runs, simplifying design and reducing installation time
    Variety of standard emitter flow rates, emitter spacing and coil lengths provide design flexibility for sub-surface and on-surface areas with or without elevation changes
    Through the use of a proprietary tubing material, the XFS-CV Dripline with heavy-duty check valve is the most flexible dripline tubing in the industry, making it the easiest dripline to design with and install
    Made with Recycled Content
    All Rain Bird XF Dripline (XFD, XFS, XFCV, XFS-CV) qualify for LEED credit 4.2 because they contain at least 20% Polyethylene post consumer recycled material by cost. These come in an assortment of coil sizes, flow rates and emitter spacing
    Reliable
    The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 20 to 60 psi
    Durable
    Dual-layered tubing (copper over black) provides unmatched resistance to chemicals, algae growth and UV damage
    Grit Tolerant
    Rain Bird’s proprietary emitter design resists clogging by use of an extra wide flow path combined with a self-flushing action

    Specifications

    Operating Range
    Opening Pressure: 14.5 psi
    Pressure: 20 to 60 psi (1.38 to 4.14 bar)
    Flow rates: 0.4, 0.6 and 0.9 gph (1.6, 2.3 and 3.5 l/hr)
    Temperature:
    -Water: Up to 100°F (37.8° C)
    -Ambient: Up to 125°F (51.7° C)
    Required Filtration: 120 mesh
    Specifications
    12" & 18" (30.5 cm, 45.7 cm) spacing
    Available in 100', 250' and 500' (30.5 m, 76.2 m and 152.4 m) coils
    Coil Colors: Copper, purple, purple stripe
    Use with XF Dripline Insert Fittings

    Dimensions

    OD: 0.634" (16mm)
    ID: 0.536" (13.6mm);
    Thickness: 0.049" (1.2mm)

    Model Listing

    XFS-CV: Coil Color - Copper

  • XFS-CV-04-12-500: 0.4 gph(1.6l/h), 12”(30.5cm) spacing, 500’(152.4m)
  • XFS-CV-04-18-500: 0.4 gph(1.6l/h), 18”(45.7cm) spacing, 500’(152.4m)
  • XFS-CV-06-12-100: 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 100'(30.5m)
  • XFS-CV-06-12-250: 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 250'(76.2m)
  • XFS-CV-06-12-500: 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFS-CV-06-18-100: 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 100'(30.5m)
  • XFS-CV-06-18-250: 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 250'(76.2m)
  • XFS-CV-06-18-500: 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 500'(152.4m)
  • XFS-CV-09-12-100: 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 100'(30.5m)
  • XFS-CV-09-12-250: 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 250'(76.2m)
  • XFS-CV-09-12-500: 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFS-CV-09-18-100: 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 100'(30.5m)
  • XFS-CV-09-18-250: 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 250'(76.2m)
  • XFS-CV-09-18-500: 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 500'(152.4m)

    • XFS-CV: Coil Color - Purple

  • XFS-CVP-04-12-500: 0.4 gph(1.6l/h), 12”(30.5cm) spacing, 500’(152.4m)
  • XFS-CVP-04-18-500: 0.4 gph(1.6l/h), 18”(45.7cm) spacing, 500’(152.4m)
  • XFS-CVP-6-12-500: 0.6 gph(2.3I/h) , spacing 12"(30.5cm), 500'(152.4m)
  • XFS-CVP-6-18-500: 0.6 gph(2.3I/h), spacing 18"(45.7cm), 500'(152.4m)
  • XFS-CVP-9-12-500: 0.9 gph(3.5I/h), spacing 12"(30.5cm), 500'(152.4m)
  • XFS-CVP-9-18-500: 0.9 gph(3.5I/h), spacing 18"(45.7cm), 500'(152.4m)

    • XFS-CV: Coil Color - Purple Stripe

  • XFS-CVPS-04-12-500: 0.4 gph(1.6l/h), 12”(30.5cm) spacing, 500’(152.4m)
  • XFS-CVPS-04-18-500: 0.4 gph(1.6l/h), 18”(45.7cm) spacing, 500’(152.4m)
  • XFS-CVPS-6-12-500: 0.6 gph(2.3I/h) , spacing 12"(30.5cm), 500'(152.4m)
  • XFS-CVPS-6-18-500: 0.6 gph(2.3I/h), spacing 18"(45.7cm), 500'(152.4m)
  • XFS-CVPS-9-12-500: 0.9 gph(3.5I/h), spacing 12"(30.5cm), 500'(152.4m)
  • XFS-CVPS-9-18-500: 0.9 gph(3.5I/h), spacing 18"(45.7cm), 500'(152.4m)

    • Features

    Proven impact drive with straight-through flow for superior performance in dirty water
    Five standard trajectory and two low angle (LA) color-coded nozzles for matched precipitation and in a wide range of applications
    360° full-circle OR arc adjustable from 20° to 340°
    Side and combination ½” or ¾” bottom inlet for design flexibility (Maxi-Paw)
    3 year warranty

    Specifications

    Precipitation Rate: 0.28 to 1.21 inches per hour (7 to 31 mm/h)
    Radius: 22 to 45 feet (6,7 to 13,7 m)
    Radius with Radius Reduction Screw: 18 ft (5,4 m)
    Pressure: 25 to 60 psi (1,7 to 4,1 Bars)
    Flow: 1.5 to 8.4 GPM (0,34 to 1,91 m3/h; 0,9 to 0,53 l/s)
    Combination 1/2" (15/21) or 3/4" (20/27) FPT bottom inlet  1/2" (15/21) FPT side inlet
    Nozzles: 06-red; 07-black; 08-blue; 10-yellow; 12-beige
    Low angle (LA) nozzles: 07 LA-black; 10 LA-yellow
    Nozzle outlet trajectory is 23° for 06, 07, 08, 10, and 12 nozzles
    LA nozzle outlet trajectory is 11°
    Available Nozzles:
    Standard trajectory 06, 07, 08, 10, 12
    Low Angle 07LA, 10LA

    Dimensions

    Overall height: 9 3/10" (23,6 cm)
    Pop-up height: 3" (7,6 cm)
    Exposed surface diameter: 5" (12,7 cm)

    Model Listing

  • 2045A: Closed Case Pop Up Sprinkler
  • 2045A-NP: Closed Case Pop Up Sprinkler with Non-Potable Purple Cover
  • 2045A-SAM: Closed Case Pop Up Sprinkler with Seal-A-Matic Check Valve
  • 2045A-SAM-NP: Closed Case Pop Up Sprinkler with Seal-A-Matic Check Valve and Non-Potable Purple Cover
  • * For Nozzle Information see performance chart

    • Features

    Preassembled units save the contractor time and reduce installation costs
    Excellent structural integrity from the swept elbow design reduces the costs associated with fatigue related failures
    Double O Ring provides extra protection against leaks and keeps threads clean of debris making hand tightening easy
    The TSJ-PRS combines the great flow characteristics of the Rain Bird turf swing joint with an inline pressure regulating outlet elbow for controlling and maintaining constant pressure right at the rotor inlet
    Double O Ring provides extra protection against leaks and keeps threads clean of debris making hand tightening easy

    Specifications

    TSJ Models:
    Pressure Rating: 315 psi at 73º F (21,7 Bars at 22,8º C)
    ¾” Joint Pressure Loss: 0.3 psi at 6 gpm (0,02 Bars at 0,4 l/s)
    1” Joint Pressure Loss: 1.5 psi at 18 gpm; 2.5 psi at 23 gpm (0,1 Bars at 1,1 l/s;  0,2 Bars at 1,5 l/s)
    1½” Joint Pressure Loss: 0.5 psi at 40 gpm; 1.6 psi at 70 gpm (0,03 Bars at 2,5 l/s;  0,1 Bars at 4,4 l/s)
    TSJ-PRS Model:
    Pressure Rating: 315 psi (21,7 Bars) @ 73° F (22,8° C) per ASTM D3139
    1" joint pressure loss: 1.5 psi at 18 gpm; 2.5 psi at 23 gpm (0.1 bar at 1.1 l/s; 0.2 bar at 1.5 l/s)
    TSJ-PRS maximum flow: 22 gpm (1.4 l/s)
    TSJ-PRS Application Information:
    The TSJ-PRS is not recommended for use in systems where the pressure in the lateral lines is equal to or less than the nominal regulation pressure, as the increased pressure drop may adversely affect the performance of such systems
    To reduce the effects of water hammer, Rain Bird recommends flow rates in the supply line not exceed 5 ft/sec (1.5 m/s). The TSJ-PRS is not intended to function as a water hammer prevention device
    There are no user-serviceable parts inside. The internal spring is under compression. Do not open the PRS unit under any circumstances

    Dimensions

    TSJ-12075: 12“ x 3/4" x 3/4" ( 30.5 cm x 20/27 x 20/27 )  L x Inlet/Outlet    
    TSJ-12: 12" x  1" x  1" ( 30.5 cm x 26/34 x 26/34 )  L x Inlet/Outlet  
    TSJ-100-PRS: 12" x 1" x 1" ( 30.5 cm x 26/34 x 26/34 )  L x Inlet/Outlet

    Model Listing

  • TSJ-12075: 12" (30.5 cm) long, 3⁄4" M NPT x M NPT swing joint
  • TSJ-12: 12" (30.5 cm) long, 1" M NPT x M NPT swing joint
  • TSJ-100-PRS: 1" swing joint with 70 psi pressure regulator, 12" (30.5 cm) long, 1" M NPT x M NPT inlet and outlet

    • Features

    Regulates outlet pressure to 30 psi, can be installed above or below ground.
    Preset outlet pressure: 30 psi (2.0 bar)
    Tested to meet Rain Bird’s high-quality standards. High Strength ABS construction and stainless steel springs provide the durability to withstand any job.

    Specifications

    Operating Range
    PSI-M30X-075: 30 psi (2.1 bar)
    Flow Range:
    PSI-M30X-075: 2.0 to 10.0 gpm; 120 to 600 gph (7.8 to 37.9 l/m)

    Dimensions

    PSI-M30X-075: 3⁄4" NPT female-threaded inlet and outlet

    Model Listing

  •     PSI-M30X-075: 3⁄4" 30 psi (2.1 bar) regulator for medium flow    

    • Features

    Simple
    Rain Bird’s low-profile emitter design reduces in-line pressure loss, allowing longer lateral runs, simplifying design and reducing installation time
    Variety of emitter flow rates, emitter spacing and coil lengths provide design flexibility for either sub-surface turf or sub-surface shrub and groundcover applications
    Reliable
    XFS Sub-Surface Dripline emitters are protected from root intrusion by Rain Bird’s patent-pending Copper Shield™ Technology resulting in a system that does not require maintenance or replacement of chemicals to prevent root intrusion
    The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi
    Durable
    Dual-layered tubing (copper over black) provides unmatched resistance to chemicals, algae growth and UV damage
    Grit Tolerant: Rain Bird’s proprietary emitter design resists clogging by use of an extra-wide flow path combined with a self-flushing action

    Specifications

    Operating Range
    Pressure: 8.5 to 60 psi (0.58 to 4.14 bar)
    Flow rates: 0.6 and 0.9 gph (2.3 l/hr and 3.5 l/hr)
    Temperature:
      -Water: Up to 100°F (37.8° C)
      -Ambient: Up to 125°F (51.7° C)
    Required Filtration: 120 mesh
    Specifications
    Available in a 500' (52.4 m) coil
    Coil Color: Copper
    Use with XF Dripline Insert Fittings

    Dimensions

    OD: 0.634" (16mm)
    ID: 0.536" (13.6mm)
    Thickness: 0.049" (1.2mm)

    Model Listing

    XFS - Coil Color: Copper

  • XFS-06-12-500: XFS, 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFS-06-18-500: XFS, 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 500'(152.4m)
  • XFS-09-12-500: XFS, 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFS-09-18-500: XFS, 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 500'(152.4m)

    • XFS - Coil Color: Purple

  • XFSP-06-12-500: XFSP, 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFSP-06-18-500: XFSP, 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 500'(152.4m)
  • XFSP-09-12-500: XFSP, 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFSP-09-18-500: XFSP, 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 500'(152.4m)

    • Features

    Extra flexible tubing for fast, easy installation
    Dual-layered tubing (brown over black or purple over black) provides unmatched resistance to chemicals, UV damage and algae growth
    Patented emitter design provides for increased reliability
    Longer lateral runs than competition
    Unique material offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation
    Choice of flow rates, spacing and coil lengths provides design flexibility for a variety of non-turfgrass applications
    Use an Air/Vacuum Relief Valve Kit when installation is below soil (pg 147)

    Specifications

    Operating Range
    Pressure: 8.5 to 60 psi (0.58 to 4.1 bar)
    Flow rates: 0.6 gph and 0.9 gph (2.3 l/h and 3.5 l/h)
    Temperature: Water up to 100° F (37.8C); Ambient up to 125° F (51.7C)
    Required filtration: 120 mesh
    Specifications
    Outside diameter: 0.634" (16.1 mm)
    Inside diameter: 0.536" (13.6 mm)
    Wall thickness: 0.049" (1.2 mm)
    Spacing: 12" or 18"
    Lengths: 100', 250', and 500' coils
    Use with XF Dripline Insert Fittings or Rain Bird Easy Fit Compression Fittings

    Model Listing

    XFD - Coil Color: Copper

  • XFD-06-12-100: XFD, 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 100'(30.5m)
  • XFD-06-12-250: XFD, 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 250'(76.2m)
  • XFD-06-12-500: XFD, 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFD-06-18-100: XFD, 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 100'(30.5m)
  • XFD-06-18-250: XFD, 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 250'(76.2m)
  • XFD-06-18-500: XFD, 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 500'(152.4m)
  • XFD-09-12-100: XFD, 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 100'(30.5m)
  • XFD-09-12-250: XFD, 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 250'(76.2m)
  • XFD-09-12-500: XFD, 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFD-09-18-100: XFD, 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 100'(30.5m)
  • XFD-09-18-250: XFD, 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 250'(76.2m)
  • XFD-09-18-500: XFD, 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 500'(152.4m)

    • XFD - Coil Color: Purple

  • XFDP-06-12-500: XFDP, 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFDP-06-18-500: XFDP, 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 500'(152.4m)
  • XFDP-09-12-500: XFDP, 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFDP-09-18-500: XFDP, 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 500'(152.4m)

    • XFD - Coil Color: Purple Stripe

  • XFDPS-06-12-500: XFDPS, 0.6 gph(2.3I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFDPS-06-18-500: XFDPS, 0.6 gph(2.3I/h), 18"(45.7cm) spacing, 500'(152.4m)
  • XFDPS-09-12-500: XFDPS, 0.9 gph(3.5I/h), 12"(30.5cm) spacing, 500'(152.4m)
  • XFDPS-09-18-500: XFDPS, 0.9 gph(3.5I/h), 18"(45.7cm) spacing, 500'(152.4m)

    • Features

    Reduces maintenance and labor costs - 40% larger filter surface than standard filters means less frequent cleaning
    Provides increased reliability – “No Spill” feature ensures dirt does not fall back into the filter during cleanup operation
    Simplifies installation and maintenance – threaded top with 0-ring makes it easy to remove and clean that stainless steel filter screen
    Efficient design – combines filtration and pressure regulation in one compact unit with fewer connections
    Available in 1" model
    Comes pre-assembled with 150 mesh (100 micron) stainless steel screen (other screen sizes available)
      Built-in 40 psi (2,7 bar) pressure regulator

    Specifications

    Operating Range
    Operating Flow: 0.3 to 20 gpm (1.13 - 75.7 l/min)
    Diagnostic Flow: 3.0 to 20 gpm (11.3 - 75.7 l/min)
    Inlet Pressure: 15 to 150 psi (1,0 to 10,3 bar)
    Regulating Pressure: 40 psi (2,7 bar)
    Filtration: 150 mesh (100 micron) stainless steel
    Note: When installing with the emission points more than 5 feet above the pressure regulating filter, a check valve should be installed after the regulator.
    Models
    PRB-100: 1” Basket Filter with built-in Pressure Regulator (40 psi ) and 200 mesh (75 micron) stainless steel screen
    PRB-QKCHK-100: 1" Basket Filter with built-in Pressure Regulator (40 psi) and 200 mesh (75 micron) stainless steel screen
    Replacement Filter Screens
    QKCHK-120M: 120 mesh (125 micron) stainless steel screen, green
    QKCHK-150M: 150 mesh (100 micron) stainless steel screen, blue
    QKCHK-200M: 200 mesh (75 micron) stainless steel screen, white
    Replacement Cap
    QKCHKCAP: (Complete cap with body o-ring)

    Features

    Higher Flow, Less Friction
    An industry‐leading flow range of 20‐62 gpm gives you unmatched versatility for commercial drip and spray irrigation applications
    With the highest maximum flow rate available, you can cover large zones while using fewer kits, saving money on every job
    Engineered to minimize friction loss, these kits preserve your water pressure in systems with a prescribed minimum PSI
    Convenience That's Ready to Go
    Ready out of the box, the 1.5" Commercial Control Zone Kit saves you and your crew valuable installation time on every job
    An intelligent, compact design provides easier access for maintenance and allows you to fit two kits into a jumbo valve box
    Reliability That's Built In
    Pre‐assembled units help to prevent mistakes that can occur during assembly
    Designed with fewer components, each kit minimizes the connection points in your system making it less susceptible to stress cracks
    Reclaimed water models (XCZ-150-LCDR) are engineered with components and materials that stand up to harsh chemicals
    Backed by a 3-year trade warranty, you can install each kit with confidence

    Specifications

    Flow Range: 20 to 62 gpm (75.7 l/min to 234.69 l/min)
    Inlet Pressure: 15 to 115 psi (1.03 to 7.9 bar)
    Regulated Pressure: 40 psi (2.8 bar)
    Filtration: 120 mesh (130 micron)
    Water Temperature: 33° F up to 110° F (0.5° C to 43° C)
    Ambient Temperature: 33° F up to 125° F (0.5° C to 52° C)
    Valve Type:
    XCZ-150-LCS: 1.5" PEB
    XCZ-150-LCDR: 1.5" PESB-R
    Power: 24 VAC 50/60 Hz (cycles/sec) solenoid
    Inrush Current: 0.41A (9.84 VA) at 50/60Hz
    Holding Current: 0.14A (3.43VA) at 50/60Hz
    Coil Resistance: 30-39 Ohms
    Two-wire compatible with ESP-LXD Decoders

    Dimensions

    XCZ-150-LCS: 15 1/4 " L x 5 3/4" W x 9½" H
    XCZ-150-LCDR: 18 1/2" L x 5 3/4" W x 9½" H

    Model Listing

  • XCZ-150-LCS: 1½" (3.81 cm) Stainless Steel Screen Filter, 120 Mesh (130 Micron); Surface Area: 42 in2 (270 cm2)
  • XCZ-150-LCDR: 1½" (3.81 cm) Disc Filter, 120 Mesh (130 Micron); Surface Area: 48 in2 (310 cm2)

    • Replacement Filters:

  • LGFC120MD: Replacement Disk Filter
  • LGFC120MS: Replacement Screen Filter

    • Features

    Reduces the number of components in a control zone, making it smaller and easier to install. More control zones can fit in one valve box
    Combination unit comes with 200 mesh (75 micron) stainless steel reduces the number of connections, making installation easier and faster
    Static RBY filter regulates pressure to a nominal 30 or 40 psi (2.0 or 2.8 bar) - PR RBY Filter Cap has sealing O-ring and unthreads to provide access to the filter element for easy cleaning
    30 or 40 psi pressure regulator is integrated into the filter body
    Robust body and cap are made of glass-filled polypropylene and provide 150 psi (10.3 bar) pressure rating

    Specifications

    Operating Range
    Flow:  
     ¾" units: 0.20 to 5.0 gpm (0.8 to 18.9 l/m)
    1" units: 3.0 to 15.0 gpm (11.4 to 56.8 l/m)
    Inlet pressure: 20 to 150 psi (1.4 to 10.3 bar)
    Regulated pressure:
    3⁄4" units: 30 psi (2.1 bar)
    1" units: 40 psi (2.8 bar)
    Note: When installing with emission points more than 5 ft. above the pressure regulating filter, a check valve should be installed after the regulator.
    Note: Filter must be installed downstream of a control valve and not under constant pressure.

    Model Listing

  • PRF-075-RBY: 3⁄4" PR RBY Filter
  • PRF-100-RBY: 1" PR RBY Filter

    • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)

    • Features

    Reliable performance even in dirty water applications. Self-flushing filter resists debris build-up  
    Rugged red brass construction for longer life  
    Durable, fabric-reinforced diaphragm composed of EPDM, a rubber material which is chlorine and chemical resistant  
    Normally closed, reverse flow design ensures valve will fail in the closed position if a tear or rip in the diaphragm occurs. Prevents flooding, water waste and landscape damage  
    Slow closing to prevent water hammer and subsequent system damage  
    One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service  
    Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning on the controller  
    Manual external bleed permits flushing debris from the system.Recommended for system start up and other repairs  
    Contamination-proof, self-flushing filter screen resists debris build-up. Water flow continuously flushes the screen, dislodging particles and debris before they can accumulate and clog the filter  
    Reclaimed water compatible: all models now feature EPDM diaphragms and chlorine-resistant parts as standard equipment  
    Three-year trade warranty

    Specifications

    Pressure: 15 to 200 psi (1.04 to 13.80 bar)  
    Flow with/without PRS-D: 5 to 200 GPM (1.14 to 45.40 m3/h; 0.32 to 12.60 l/s)  
    Temperature: up to 150° F (66° C)  
    Power: 24 VAC 50/60Hz (cycles/sec) solenoid power requirement  
    Inrush current: 0.21A (5.0 VA) at 50/60Hz  
    Holding current: 0.10A (2.4 VA) at 50/60Hz  
    Solenoid coil resistance: 45-55 Ohms (50 nominal)

    Dimensions

    100-EFB-CP: 6" x 4½" x 3¼" (8.3 cm) x (15.2 cm) x (11.4 cm) H x L x W   
    150-EFB-CP: 6 ½" x 5½" x 4½" (11.4 cm) x (16.5 cm) x (14 cm) H x L x W   
    200-EFB-CP: 7" x 6¾ " x 5¾" (14.6 cm) x (17.8 cm) x (17.1 cm) H x L x W

    Model Listing

  • 100-EFB-CP: 1"    
  • 150-EFB-CP: 1½"  
  • 200-EFB-CP: 2"

    • Features

    Provides convenient 30 psi (2.1 bar) pressure regulation at the riser for any ½" FPT emission device or compression adapter
    Can be installed above or below grade
    Can be used with Xeri-bird™ 8 Multi-Outlet Emission Device (see page 121)

    Specifications

    Operating Range
    Flow: 0.50 to 4.00 gpm; 30 to 240 gph (1.9 to 15.1 l/m)
    Inlet Pressure: 15 to 70 psi (1.0 to 4.8 bar)

    Dimensions

    1⁄2" female-threaded inlet
    Height: 4" (10 cm)

    Model Listing

  • PRS-050-30: 1/2" Retrofit Pressure Regulator

    • Features

    Unique hybrid construction featuring durable red brass body and glass filled nylon bonnet for long life at a value price  
    Normally closed, forward flow design  
    Slow closing to prevent water hammer and subsequent system damage  
    Robust solenoid provides dependable performance even during constant operation  
    Flow control handle adjusts water flows as needed and incorporates a brass thread insert for longer life  
    Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning the valve on at the controller  
    Manual external bleed permits flushing debris from the system. Recommended for system start up and repairs  
    Highly efficient operation with extremely low pressure loss  
    Patented nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging  
    Three-year trade warranty
    Options
    Accommodates optional, field installed PRS-D pressure regulating module to ensure optimum sprinkler performance  
    Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 10.35 bar  
    Compatible with ESP-LXD decoders

    Specifications

    Pressure: 20 to 200 psi (1.4 to 13.8 bar)  
    Flow with/without PRS-D option: 60 to 300 gpm (13.6 to 68.1 m3/h; 3.78 to 18.90 l/s)  
    Temperature: up to 140° F (60° C)  
    Power: 24 VAC 50/60 Hz (cycles/sec) solenoid  
    Inrush current: 0.41 A (9.8 VA) at 50/60Hz  
    Holding current: 0.14 A (3.43 VA) at 50/60Hz    
    Coil resistance: 30-39 Ohms, nominal

    Dimensions

    Height: 13 5/8" (34.61 cm)  
    Length: 8" (20.32 cm)   
    Width: 7" (17.78 cm)

    Model Listing

  • 300-BPES: 3" NPT

    • Features

    Optional locking cover on models 33-DLRC, 44-LRC, 5-LRC, 33-DNP, 44-NP, and 5-NP (use 2049 key to unlock). Metal cover on model 7 only  
    One-piece body design (models 3-RC, 5-RC and 7)  
    Two-piece body design for easy servicing (models 33-DRC, 44-LRC, 44-RC, 33-DNP, and 44-NP)  
    Strong corrosion-resistant stainless steel spring prevents leakage  
    Thermoplastic cover for durability  
    33-DNP, 44-NP, and 5-NP covers marked with "Do Not Drink!" warnings in English and Spanish  
    Three-year trade warranty

    Specifications

    Pressure: 5 to 125 psi (0.35 to 8.63 bar)  
    Flow: 10 to 125 gpm (2.27 to 28.38 m3⁄h; 37.8 to 473 l/m)  
    33-DNP, 44-NP, and 5-NP flow: 10 to 70 gpm (2.27 to 15.89 m3⁄h; 37.8 to 265 l/m)

    Dimensions

    3-RC: Height 4¼" (10.8 cm)  
    33-DRC: Height 4 3⁄8" (11.1 cm)  
    33-DLRC: Height 4 5⁄8" (11.7 cm)  
    44-RC: Height 6" (15.2 cm)  
    44-LRC: Height 6" (15.2 cm)  
    5-RC: Height 5½" (14.0 cm)  
    5-LRC: Height 5½" (14.0 cm)  
    7: Height 5¾" (14.6 cm)  
    33-DNP: Height 4 3/8" (11.1 cm)  
    44-NP: Height 6" (15/2 cm)  
    5-NP: Height 5½" (14.0 cm)
       

    Model Listing

  • 3-RC: ¾" NPT Rubber Cover, 1-Piece Body  
  • 33-DRC: ¾" NPT Double Track Key Lug, Rubber Cover, 2-Piece Body      
  • 33-DLRC: ¾" NPT Double Track Key Lug, Locking Rubber Cover, 2-Piece Body  
  • 44-RC: 1" NPT Rubber Cover, 2-Piece Body  
  • 44-LRC: 1" NPT Locking Rubber Cover, 2-Piece Body  
  • 5-RC: 1" NPT Rubber Cover, 1-Piece Body  
  • 5-RC-BSP: 1" BSP Rubber Cover, 1-Piece Body, BSP threaded  
  • 5-LRC-BSP: 1" BSP Locking Rubber Cover, 1-Piece Body, BSP threaded  
  • 7: 1½" NPT Metal Cover, 1-Piece Body

    • Non-Potable

  • 33-DNP: ¾" NPT Non-potable, Purple Locking Rubber Cover, 2-Piece Body  
  • 44-NP: 1" NPT Non-potable, Purple Locking Rubber Cover, 2-Piece Body  
  • 5-NP: 1" NPT Non-potable, Purple Locking Rubber Cover, 1-Piece Body

    • International

  • 33DK: Valve key ¾” male and ½” female threads  
  • 5LRC: 1” BSP female threaded inlet with locking rubber cover  
  • 55K-1: Valve key 1” BSP male threads

    • Features

    • Available in three models: 
      • 25,4 cm (10 in.) round valve box with snap-in lid
      • 30,5 cm (12 in.) rectangular valve box with snap-in lid
      • Irrigation hydrant with interlocking lid, built-in 19 mm (3/4 in.) male ball valve outlet and 19 mm (3/4 in.) female inlet
    • Provide rugged, no-nonsense dependability
    • Lightweight and durable black bodies prevent soil and other debris from entering the box
    • Green lids help blend into grass and foliage
    • Pre-molded slots provide quick and easy supply pipe placement
    • Bottom flanges to help prevent sinking in unstable ground
    • Black body and green cover constructed of polypropylene
    • Designed to provide tight seals and easy maintenance access

    Specifications

    Dimensions:

    • RNDVBA10 – 25.4 cm (10 in.) Round Valve Box 
      • Top opening diameter (nominal): 24,0 cm (9.4 in.)
      • Bottom opening diameter (nominal): 33,5 cm (13.2 in.)
      • Height (nominal): 25,5 cm (10.0 in.)
    • STDVBA – 30.5 cm (12 in.) Rectangular Valve Box
      • Length (nominal): 38,6 cm (15.2 in.)
      • Width (nominal): 37,0 cm (14.6 in.)
      • Height (nominal): 30,5 cm (12.0 in.)
    • RNDVBA34 – Round Irrigation Hydrant
      • Top opening diameter (nominal): 21,0 cm (8.3 in.)
      • Bottom opening diameter (nominal): 18,0 cm (7.1 in.)
      • Height (nominal): 12,0 cm (4.7 in.)
      • Male ball valve outlet: 19,0 mm (3/4 in.) 
      • Female inlet: 19,0 mm (3/4 in.) 

    Dimensions

    7 Inch Round Valve Box- Bottom Diameter: 8.4 inches (21.4 cm) x  Height: 9.2 inches (23.4 cm)
    10 Inch Round Valve Box- Bottom Diameter: 11.8 inches (30,0 cm) x  Height: 10.2 inches (26,0 cm)
    Standard Valve Box- Length: 23.2 inches (59.0 cm)  x Width: 19.3 inches (49.1cm)  x Height: 12.5 inches (31.8 cm)
    Standard Extension - Length: 20.0 inches (50.8 cm) x  Width: 14.75 inches (37.5 cm) x Height: 6.75 inches (17.1 cm)
    Jumbo Valve Box - Length: 27.6 inches (70,0 cm) x Width: 21.0 inches (53,2 cm) x  Height: 12.5 inches (31.6 cm)
    Jumbo Extension - Length: 24.4 inches (62.0 cm) x Width: 17.9 inches (45.5 cm) x Height: 6.75 inches (17.2 cm)
    Super Jumbo Valve Box - Length: 33.1 inches (84.1 cm) x Width: 23.9 inches (60.7 cm) x Height: 15.0 inches (38.1 cm)
    Maxi Jumbo Valve Box - Length: 40.4 inches (102.5 cm) x Width: 27.1 inches (68.9 cm) x Height: 18.0 inches (45.7 cm)

    Model Listing

    RNDVBA10 – 25.4 cm (10 in.) Round Valve Box

  • Lightweight and durable black body and snap-in green lid
  • Provides protection for manual or electric valves from damage
  • For use with one valve

    • STDVBA – 30.5 cm (12 in.) Rectangular Valve Box

  • Lightweight and durable black body and snap-in green lid
  • Provides protection for manual or electric valves from damage
  • For use with up to four valves

    • RNDVBA34 – Round Irrigation Hydrant

  • Lightweight and durable black body and interlocking green lid
  • Built-in 19 mm (3/4 in.) male ball valve outlet and 19 mm (3/4 in.) female inlet
  • Ideal for connecting hoses or other irrigation products to a water source

    • Features

    Strength and Stability – Multiple sizes and shapes are designed with corrugated sides and wide flange bases for maximum durability, compression strength, and stability  
    Smart Lid Design – Designed with no holes to keep out pests, beveled edges to minimize damage potential from turf equipment, and for easy hand and shovel access  
    Flexible Installations – Interlocking stacking capabilities, extension models and pipe hole knockouts support deeper and flexible installations    
    Environmentally Friendly – Earth‑friendly, LEED-compliant material made of 100% recycled materials (black boxes and black lids only)

    Model Listing

    7 Inch Round Valve Box

  • VB7RND: 7" Round Body & Green Lid  
  • VB7RNDB: 7" Round Body Only  
  • VB7RNDBKL: Black Lid  
  • VB7RNDGL: Green Lid  
  • VB7RNDPL: Purple Lid

    • 10 Inch Round Valve Box

  • VB10RND: 10" Round Body & Green Lid  
  • VB10RNDB: 10" Round Body Only  
  • VB10RNDL: Green Lid  
  • VB10RNDPL: Purple Lid  
  • VB10RNDBKL: Black Lid  
  • VB10RNDH: 10" Round Body & Locking Green Lid

    • Standard Valve Box

  • VBSTD: Standard Body & Green Lid  
  • VBSTDB: Standard Body Only  
  • VBSTDBKL: Black Lid 
  • VBSTDPL: Purple Lid  
  • VBSTDH: Standard Body & Locking Green Lid

    • Standard Extension 

  • VBSTD6EXTB: Standard Extension Body Only

    • Jumbo Valve Box 

  • VBJMB: Jumbo Body & Green Lid  
  • VBJMBB: Jumbo Body Only  
  • VBJMBGL: Green Lid  
  • VBJMBPL: Purple Lid  
  • VBJMBBKL: Black Lid  
  • VBJMBH: Jumbo Body & Locking Green Lid

    • Jumbo Extension

  • VBJMB6EXTB: Jumbo Extension Body Only

    • Super Jumbo & Maxi Jumbo Valve Box

  • VBSPRH: Super Jumbo Body & 2 Lock Green Lid  
  • VBMAXH: Maxi Jumbo Body & 2 Lock Green Lid

    • Locking Systems

  • VB-LOCK-H: Hex head 3⁄8" x 2 1⁄4" (1.0 x 5.7 cm) bolt, washer, and clip  
  • VB-LOCK-P: Penta head 3⁄8" x 2 1⁄4" (1.0 x 5.7 cm) bolt, washer, and clip

    • Features

    Light & durable construction  
    Side ridges for additional side wall support    
    Pre-molded pipe slots    
    Bottom flanges to help prevent sinking  
    Four colors: available in green, black, tan and purple  
    Multiple configurations designed to provide tight seals and easy maintenance access  
    Earth‑friendly, LEED-compliant material made of 100% recycled materials (black boxes and black lids only)

    Specifications

    PVB Professional Series 6" Round Valve Box

    PVB6RND: 6" round black body & overlapping green lid
    PVB6RNDP: 6" round black body & overlapping purple lid
    PVB6RNDT: 6" round black body & overlapping tan lid
    PVB6RNDGL: 6" round green lid only

    • Snap-in overlapping lid
    • Skid-resistant texture
    • Body built with three ridges for
    • additional sidewall support
    • Top Opening: 6 1⁄8" diameter
    • Bottom Opening: 8 5⁄8" diameter

    PVB Professional Series 10" Round Valve Box

    PVB10RND: 10" round black body & overlapping green lid
    PVB10RNDP: 10" round purple body & overlapping purple lid
    PVB10RNDT: 10" round tan body & overlapping tan lid
    PVB10RNDGL: 10" round green lid only

    • Overlapping lid with bolt hole and twist lock
    • Skid-resistant lid texture
    • Body built with double ridges for
    • additional sidewall support
    • Top Opening: 10" diameter
    • Bottom Opening: 12 13⁄16" diameter

    PVB Professional Series Mini Standard Valve Box

    PVBMST: 10" mini-standard black body & drop-in green lid

    • Our compact alternative to a standard size box
    • Drop-in lid
    • Skid-resistant lid texture
    • Top Opening: 15" L x 9 ½" W
    • Bottom Opening: 18" L x 12 ½" W x 10" H

    PVB Professional Series Standard Valve Box

    PVBSTD: 12" standard black body & drop-in green lid
    PVBSTDP: 12" standard purple body & drop-in purple lid
    PVBSTDT: 12" standard tan body & drop-in tan lid
    PVBSTDGL: 12" standard green lid only

    • Drop-in lockable lid
    • Skid-resistant lid texture
    • Double ledge lid support
    • Ridge adds additional support to sidewalls
    • Top Opening: 18 ¼" L x 13" W
    • Bottom Opening: 21 ¼" L x 15 15⁄16" W x 12" H

    PVBSTD-EXT: Standard Extension

    PVBSTDEXT: 6" black body & overlapping green lid
    PVBSTDEXTT: 6" tan body & overlapping tan lid

    • Overlapping lockable lid
    • Skid-resistant lid texture
    • Body can be used to extent the PVB Standard series
    • Body can be used as a 6" deep box
    • Top Opening: 17" L x 11 ¾" W
    • Bottom Opening: 18 7⁄8" L x 13 5⁄8" W x 6 ¾" H

    PVBJMB: Jumbo Valve Box

    PVBJMB: 12" black body & drop-in green lid
    PVBJMBP: 12" purple body & drop-in purple lid
    PVBJMBT: 12" tan body & drop-in tan lid
    PVBJMBGL: 12" jumbo green lid only

    • Drop-in lockable lid
    • Skid-resistant lid texture
    • Double ledge lid support
    • Ridge adds additional support to sidewalls
    • Top Opening: 22 ¼" L x 16 3⁄8" W
    • Bottom Opening: 25 ¼" L x 19 3⁄8" W x 12" H

    PVBJMB-EXT: Jumbo Extension

    PVBJMBEXT: 6" black body & overlapping green lid
    PVBJMBEXTP: 6" purple body & overlapping purple lid
    PVBJMBEXTT: 6" tan body & overlapping tan lid

    • Overlapping lockable lid
    • Skid-resistant lid texture
    • Body can be used to extent the PVB Jumbo series
    • Body can be used as a 6" deep box
    • Top Opening: 21 3⁄8" L x 15 7⁄8" W
    • Bottom Opening: 22 15⁄16" L x 16 3⁄8" W x 6 5⁄8" H6"

    6" Round Lids

    PVB6RNDGL: 6" round green lid

    10" Round Lids

    PVB10RNDGL: 10" round green lid

    12" Standard Lids

    PVBSTDGL: 12" standard green lid

    12" Jumbo Lids

    PVBJMBGL: 12" jumbo green lid

     

    Dimensions

    6" Round Valve Box - Top Opening: 6 1⁄8" diameter. Bottom Opening: 8 5⁄8" diameter
    10" Round Valve Box -  Top Opening: 10" diameter.  Bottom Opening: 12 13⁄16" diameter
    Mini Standard Valve Box - Top Opening: 15" L x 9 ½" W. Bottom Opening: 18" L x 12 ½" W x 10" H
    Standard Valve Box - Top Opening: 18 ¼" L x 13" W.  Bottom Opening: 21 ¼" L x 15 15⁄16" W x 12" H
    Standard Extension - Top Opening: 17" L x 11 ¾" W.  Bottom Opening: 18 7⁄8" L x 13 5⁄8" W x 6 ¾" H
    Jumbo Valve Box - Top Opening: 22 ¼" L x 16 3⁄8" W.  Bottom Opening: 25 ¼" L x 19 3⁄8" W x 12" H
    Jumbo Extension - Top Opening: 21 3⁄8" L x 15 7⁄8" W.  Bottom Opening: 22 1⁄16" L x 16 3⁄8" W x 6 5⁄8" H

    Model Listing

    6" Round Valve Box

  • PVB6RND: 6" round black body & overlapping green lid

    • 10" Round Valve Box

  • PVB10RND: 10" round black body & overlapping green lid

    • Mini Standard Valve Box

  • PVBMST: 10" ministandard black body & drop-in green lid

    • Standard Valve Box

  • PVBSTD: 12" standard black body & drop-in green lid  
  • PVBSTDP: 12" standard purple body & drop-in purple lid

    • Standard Extension

  • STDEXT: Can be used to extend the Standard Valve box by 6” in height or as a 6” deep box to reduce digging
  • PVBSTDEXT: 6" black body & overlapping green lid  
  • PVBSTDEXTT: 6" tan body & overlapping tan lid

    • Jumbo Valve Box

  • PVBJMB: 12" black body & drop-in green lid  
  • PVBJMBP: 12" purple body & drop-in purple lid

    • Jumbo Extension

  • PVBJMBEXT: 6" black body & overlapping green lid

    • Features

    Additional orifice for close-in watering minimizes brown spots around the spray head and eliminates gaps in coverage so the entire watering area is more uniformly covered
    Superior coverage for efficient watering. Use up to 30% less water
    Matched precipitation rate with Rain Bird HE-VAN and MPR nozzle
    Five-year trade warranty

    Specifications

    Spacing: 5 to 15 feet (1.7 to 4.6 m)*
    Pressure: 15 to 30 psi (1.0 to 2.1 bar)
    Optimum pressure: 30 psi (2.1 bar)**
    * These ranges are based on proper pressure at nozzle
    ** Rain Bird recommends using 1800/RD1800 PRS Spray Bodies to maintain optimum nozzle performance in higher pressure situations

    Model Listing

  • U-8 Series: 8-foot Quarter, Half, Full nozzles
  • U-10 Series: 10-foot Quarter, Half, Full nozzles
  • U-12 Series: 12-foot Quarter, Half, Full nozzles
  • U-15 Series: 15-foot Quarter, Half, Full nozzles

    • Features

    Permits convenient conversion to drip tubing when used with barbed adapter
    Provides 30 psi (2,0 bars) pressure regulation and a 200-mesh (75 micron) screen that is easily accessible
    Supports flow rates of 0.5 to 6 gpm
    Internal assembly drops into any 1804 spray head body to easily retrofit existing system to Xerigation® products
    Comes with 1 low profile Barb Tee and 1 Elbow Fitting
    Includes (1) ½" FPT x Elbow Fitting and (1) ½" FPT x Tee Fitting for easy connection to drip tubing

    Specifications

    Operating Range
    Flow: 0.5 to 6 gpm (0.11 to 1.36 l/m)
    Inlet pressure: 15 to 70 psi (1.0 to 4.8 bar)
    Regulated pressure: 30 psi (2.1 bar)
    Filtration: 200 mesh (75 micron)

    Dimensions

    ½" (15/21) female-threaded inlet
    ½" (15/21) male-threaded swivel outlet
    Width: Cap: 2.25" (5.70 cm) Body: 1.5" (3.80cm)

    Model Listing

  • 1800-RETRO: 1800 Series Spray Body Retrofit Assembly

    • Replacement Screen

  • RBY-200SSMX: (200 mesh stainless steel screen)

    • Copyright © 2026 Rain Bird Corporation. All rights reserved.