New! XFA Dripline
With Pressure Compensating, Anti-Siphon Emitters
Manufactured in Australia for demanding Australian conditions, Rain Bird XFA dripline is ideal for on-surface, densely planted beds. XFA dripline features emitters with one of the widest pressure compensating ranges available resulting in consistent emitter flow with elevation changes and long lateral run lengths. Advanced pressure compensation performance leads to better irrigation uniformity throughout the zone. The XFA dripline emitter also includes anti-siphon functionality to resist infiltration of grit and debris into the emitter at the end of each irrigation cycle. The emitter includes an inlet filter and high turbulence from an extra-large labyrinth to further reduce clogging.
This product qualify for LEED credit 4.2 because it contains at least 20% polyethylene recycled material
Features
Through the use of a proprietary tubing material blend, XFA dripline has exceptional flexibility and kink resistance. XFA dripline has a bend radius of 4” allowing installation in narrow zones with tight curves.
The low profile XFA emitter design reduces pressure loss resulting in lateral run lengths over 25% longer than competitor products
Dual-layered tubing (brown/lilac over black) provides resistance to UV damage – suitable for on-surface installations
Accepts industry standard 13mm insert fittings
Laser etched information on the tube allows easy identification of dripline type, flow rate and spacing
Available in a variety of flow rates, emitter spacings, and coil lengths
Both brown and lilac colors available
Specs
Operating Range
Pressure: 50 to 350 kPa (7.25 to 50 psi)
Flow Rates: 1.5, 2.0 and 3.5 L/Hr
Filtration Requirement: 120 mesh
Water Temperature: Up to 43° C (110° F)
Specifications
Tube Color: Brown and Lilac
Dimensions
OD: 15.3mm
ID: 13mm
Wall Thickness: 1.14mm
Emitter Spacing: 30 and 40cm
Coil Lengths: 50, 100 and 200m
