Rain Bird 551 Series
Full/Part Circle Golf Rotors
Full/Part Circle Golf Rotors
Rain Bird 551 Series provides the right coverage for tee boxes, greens and other small areas with short and medium throw range. With Rapid-Adjust Technology your staff can make easy arc adjustments with the turn of a screw. Patented MemoryArc® retains two part-circle arc settings, so you can shift between full and part-circle operation in seconds. Nozzles for the 551 series offer higher flow rates and large droplets that cut through wind allowing you to apply water precisely where needed and in a shorter amount of time.
- Has a radius of 32' to 55' (9.8 to 16.8 m).
- Can handle pressures from 60 to 100 psi (4.1 to 6.9 bars).
- Nozzle design provides superior water distribution with less sensitivity to spacing difference.
- Solid design and construction provide a higher degree of reliability and longer life than commercial-grade products.
- Available in electric, integrated control, combined use Stopamatic/Hydraulic and Seal-A-Matic™ models.
Rain Bird® golf rotors are engineered for precise application and distribution uniformity, helping you get the most from your water source. With intelligent, easy-to-use features like a top‑serviceable design and quick full-circle/part-circle adjustments, Rain Bird golf rotors help you and your crew save time every week.
Designed for Timeless Compatibility™ with every EAGLE® rotor manufactured since 1992, these rotors give you the flexibility to update internals without having to dig up the case, saving you even more time.
Delivers 25kV surge protection and built‑in filtration for a second level of protection from debris. Eliminates the most common maintenance tasks that plague competing rotors.
With superior performance in a smaller footprint than competing rotors and an intelligent snap-ring design for quick access to serviceable components, Rain Bird rotors have long been the perfect choice for golf courses.
- 32' to 55' (9.8 m to 16.8 m)
- 6.83 to 13.63 gpm (0.43 to 0.86 l/s); (1.55 to 3.10 m³/h)
- Full-circle, 360°
- Part-circle, 30-345°
Maximum Inlet Pressure
- E/IC: 150 psi (10.3 bars)
- S/H: 100 psi (6.9 bars)
Pressure Regulation Range
- 60 to 100 psi (4.1 to 6.9 bars)
Factory Pressure Settings
- E/IC available in 70 and 80 psi (4.8 and 5.5 bars)
- Body Height, Models E, IC, S/H: 12.0" (30.5 cm)
- Body Height, Model B: 9.6" (24.5 cm)
- Pop-Up Height to Mid-Nozzle: 2.6" (6.6 cm)
- Top Diameter, Models E, IC, S/H: 6.25" (15.9 cm)
- Top Diameter, Model B: 4.25" (10.8 cm)
Maximum Stream Height
- 51 Nozzle: 5' (1.5 m)
- 52, 53, 54 Nozzles: 13' (4.0 m)
- 51 Nozzle: 12°
- 52, 53, 54 Nozzles: 25°
- Models E, IC, S/H: 1.25" (3.2 cm) ACME
- Model B: 1" (2.5 cm) ACME
- Block: 10' (3.1 m) of elevation
- SAM/Hydraulic: 15' (4.6 m) of elevation
- 180° in ≤ 90 seconds, 75 seconds nominally
- 24 VAC solenoid power requirement: 0.41 amp inrush current (9.8 VA)
- 60 cycle: 0.25 amp holding current (6.0 VA)
- 50 cycle: 0.32 amp holding current (7.7 VA)
- Up to 25KV standard on electric models with the GBS25 solenoid
Top-Serviceable Internal Components
- E: Electric
- IC: Integrated Control
- S/H: Combined use Stopamatic (SAM) or Hydraulic (N.O.)*
- B: Seal-A-Matic™ device
* N.O.—Normally open