Sensors & Meters

Features

Ultrasonic Flow Sensor Benefits
No straight-pipe requirement!  Place immediately after a bend or valve, even in the same valve box  (Jumbo size valve box recommended for easiest fit)
Read very low and high flow, all in one sensor
No moving parts for greater reliability and allowing blowout for winterization with the sensor installed
Pressure rated to 200 PSI and an operating temperature of 32 - 150 degrees Fahrenheit
On-board LED Lights indicating power, full pipe status, relative forward flow rate, and reverse flow
Simple setup at the controller with a standard K and Offset value for wide compatibility
Flow Sensors Enable Key LX Series Controller Features
Flo-Watch™. Flo-Watch constantly monitors for low flow and excess flow conditions caused by broken lines or heads, automatically quarantines and shuts down the problem area, and continues to irrigate non-affected areas. Saves water, saves plant material, and enables irrigation programs to continue and complete
Learned Flow. The controller automatically learns station flow rates resulting in more accurate flow rates. The automatic collection prevents you from having to manually enter data from drawings, or physically visiting each valve to collect flow data and manually entering the data into a controller
FloManager®. FloManager determines the optimal station irrigating sequence. The system runs at its fullest capacity until programs are complete. The controller automatically selects and runs multiple valves at the same time within hydraulic parameters, allowing for shorter water windows
Using With Transmitters and Pulse Decoders
Programmable from a computer (PT322 and PT5002 – Maxicom and SiteControl Systems only – not required for ESP-LXMEF or ESP-LXD)
Reliable solid-state design, available with or without LCD display (PT322 only)
Operates with MAXILink,™ and (hard-wire) two-wire satellite systems
Easy-to-program, menu-driven design
Mounted in optional NEMA enclosure (PT5002 only)

Specifications

Flow Range
UFS100: 0.3 - 50GPM
UFS150: 0.5 - 110GPM
UFS200: 1.0 - 200GPM
Sensor Attributes
Accuracy: +- 2% (non-variable, across full flow range)
Velocity: 2-20 Feet (0.6-6.1 meters) per second depending on model and system specifications
Pressure: 200 PSI Working Pressure  
Temperature: 32° - 150° F (0° - °65 C)Working Temperature
Configuration
For ESP-LXIVM 2-Wire Systems: the Flow Sensor is installed with a 2-Wire Sensor Device (LXIVMSEN)
For ESP-LXD Decoder Systems: the Flow Sensor is installed with a Two-Wire Decoder Sensor Decoder (SD211TURF) (Previously SD210TURF)
For ESP-LXMEF Systems: the Flow Sensor is attached to the FSM-LXME Flow Smart Module
For ESP-LXME2 PRO Systems: the Flow Sensor is attached to the Pro Smart Module Flow +/- terminals
For (Hard Wire) Two-Wire Satellite Systems (Maxicom²® and SiteControl): the Flow Sensor is installed with a Pulse Transmitter and a Rain Bird Pulse Decoder (DECPULLR)
For Link Radio Satellite Systems (Maxicom² and SiteControl): the Flow Sensor is installed with a Pulse Transmitter (no pulse decoder required)
For ESP-SITE Satellite Systems (Maxicom): the Flow Sensor is installed with a Pulse Transmitter (no decoder required)
For SiteControl Decoder Systems: the Flow Sensor is installed with a Two-Wire Decoder Sensor Decoder (SD211TURF) (Previously SD210TURF)
*Surge protection (FSSURGEKIT) is recommended for Maxicom and SiteControl systems – One at the Pulse Transmitter, and if more than 50’ of wire run, one at the Flow Sensor. FSSURGEKIT is not compatible with ESP-LXMEF and ESP-LXD Controllers

Dimensions

UFS200 - 10 1/2” x 4 3/4” H = 3 7/8” (267mm x 121mm x 98mm)
UFS150 - 101/2” x 4 3/4” H = 4 3/8” (267mm x 121mm x 111mm)
UFS100 - 101/2” x 4 3/4” H = 4 7/8” (267mm x 121mm x 124mm)

How to Specify

How to Specify an Ultrasonic Flow Sensor

Model Listing

  • UFS100: 1in Ultrasonic Flow sensor
  • UFS150: 1.5in Ultrasonic Flow sensor
  • UFS200: 2in Ultrasonic Flow sensor
  • Features

    PT5002 Flow Monitor/Transmitter
    Large, easy to read backlit display
    Simple menu driven soft-key programming
    Pre-programmed Rain Bird flow sensor k-factor and offset selection
    Flow Sensor or Wind Sensor input
    Instantaneous Flow Rate
    Resettable Total Flow
    Hi Flow / High Wind Master Valve Shutoff
    Pulse Decoder output to various controllers and central controls
    PT322 Pulse Transmitter
    Reliable Solid State design
    Compact, easy to mount
    Secure snap-fit connectors
    Two diagnostic Status LEDs
    Programmable from Laptop or Computer

    Specifications

    PT5002 & PT322
    Input required: -12-30 VDC/VAC on PT322-12-24 VAC/VDC on PT3002/PT5002
    Output: Pulse output
    Operating Temp: -4° F-158° F (-20° C to 70° C)

    Model Listing

    PT5002 Flow Monitor/Transmitter

  • PT5002 PM - Panel Mount Kit with I/O terminal connectors and 24v power supply included
  • PT5002 WM - Wall Mount Kit with weatherproof NEMA enclosure, I/O terminal connectors and 24v power supply included
  • PT322 Pulse Transmitter

  • PT322 - Pulse Transmitter
  • Features

    Flow Sensor Features
    Simple six-bladed impeller design
    Designed for outdoor or underground applications
    Available in PVC, brass, or stainless steel construction
    Pre-installed in tee or saddle mounted insert versions
    Flow Sensors Enable Key LX Series Controller Features
    Flo-Watch™. Flo-Watch constantly monitors for low flow and excess flow conditions caused by broken lines or heads, automatically quarantines and shuts down the problem area, and continues to irrigate non-affected areas. Saves water, saves plant material, and enables irrigation programs to continue and complete
    Learned Flow. The controller automatically learns station flow rates resulting in more accurate flow rates. The automatic collection prevents you from having to manually enter data from drawings, or physically visiting each valve to collect flow data and manually entering the data into a controller
    FloManager®. FloManager determines the optimal station irrigating sequence. The system runs at its fullest capacity until programs are complete. The controller automatically selects and runs multiple valves at the same time within hydraulic parameters, allowing for shorter water windows
    Using With Transmitters and Pulse Decoders
    Programmable from a computer (PT322 – Maxicom and SiteControl Systems only – not required for ESP-LXMEF or ESP-LXD)
    Reliable solid-state design, available with or without LCD display
    Operates with MAXILink,™ and (hard-wire) two-wire satellite systems
    Easy-to-program, menu-driven design
    Mounted in optional NEMA enclosure (PT5002 only)

    Specifications

    Sensors
    Accuracy: +- 1% (full scale)  
    Velocity: 1/2-30 feet (0.15 - 9.2 meters) per second depending on model  
    Pressure: 400 psi (27.5 bars) (max) on brass models; 100 psi (6.9 bars) (max) on plastic models  
    Temperature: 220° F (105° C) (max) on brass models; 140° F (60° C) (max) on plastic models
    Configuration
    For ESP-LXIVM Two-Wire Systems: the Flow Sensor is installed with a Two-Wire Sensor Device (LXIVMSEN)
    For ESP-LXD Decoder Systems: the Flow Sensor is installed with a Two-Wire Decoder Sensor Decoder (SD211TURF) (Previously SD210TURF)
    For ESP-LXMEF Systems: the Flow Sensor is attached to the FSM-LXME Flow Smart Module
    For (Hard Wire) Two-Wire Satellite Systems (Maxicom²® and SiteControl): the Flow Sensor is installed with a Pulse Transmitter and a Rain Bird Pulse Decoder (DECPULLR)
    For Link Radio Satellite Systems (Maxicom² and SiteControl): the Flow Sensor is installed with a Pulse Transmitter (no pulse decoder required)
    For ESP-SITE Satellite Systems (Maxicom): the Flow Sensor is installed with a Pulse Transmitter (no decoder required)
    For SiteControl Decoder Systems: the Flow Sensor is installed with a Two-Wire Decoder Sensor Decoder (SD211TURF) (Previously SD210TURF)
    *Surge protection (FSSURGEKIT) is recommended for Maxicom and SiteControl systems – One at the Pulse Transmitter, and if more than 50’ of wire run, one at the Flow Sensor. FSSURGEKIT is not compatible with ESP-LXMEF and ESP-LXD Controllers

    Dimensions

    FS100P: 3.50" x 3.94" x 1.315" (89mm x 100mm x 33mm)      
    FS150P: 5.0" x 5.16" x 2.38" (127mm x 131mm x 60mm)      
    FS200P: 5.63" x 5.64" x 2.88" (143mm x 143mm x 73mm)      
    FS300P: 6.50" x 6.83" x 4.23" (165mm x 173mm x 107mm)  
    FS400P: 7.38" x 7.83" x 5.38" (187mm x 199mm x 137mm)  
    FS100B: 5.45" x 4.94" x 2.21" (138mm x 126mm x 56mm)      
    FS150B: Flow Sensor 6.5" x 5.19" x 2.5" (165mm x 132mm x 64mm)      
    FS200B: 4.25" x 8.35" x 2.94" (108mm x 212mm x 75mm)    
    FS350B: 7.13" x 3"(diameter) (181mm x 76mm (diameter)

    Model Listing

  • FS100P: 1" (25mm) PVC Tee Flow Sensor  
  • FS150P: 1 1/2" (40mm) PVC Tee Flow Sensor  
  • FS200P: 2" (50mm) PVC Tee Flow Sensor  
  • FS300P: 3" (75mm) PVC Tee Flow Sensor  
  • FS400P: 4" (110mm) PVC Tee Flow Sensor  
  • FS100B: 1" (25mm) Brass Tee Flow Sensor  
  • FS150B: 1 1/2" (40mm) Brass Tee Flow Sensor  
  • FS200B: 2" (50mm) Brass Tee Flow Sensor  
  • FS350B: 3" and higher, Brass Insert Flow Sensor  
  • FSTINSERT: Replacement insert for Tee type sensors