Pressure-Compensating Modules

Point-Source Medium-Flow Emitters for Watering Larger Shrubs and Trees

The only emitters with self-piercing barbs, making them the easiest to install using the Xeriman™ tool.

Widest selection of pressure-compensating emitters, with 6 flow rates and 2 inlet options.

Features

  • Most compact and unobtrusive emitters
  • Flow rates from 5 to 24 gph (18.93 to 90.84 l/h)
  • Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
  • Available with 2 different inlets:
  • Robust design - durable plastic construction is UV-resistant and color-coded to identify flow rate

Specs

Operating Range*

  • Flow: 5 to 24 gph (18.93 to 90.84 l/h)
  • Pressure: 10 to 50 psi (0.7 to 3.5 bar)
  • Required filtration: 100 mesh (150 micron)

* IMPORTANT NOTE: Use a PC Diffuser Cap to eliminate squirting water when using a PC Module staked at the end of 1/4" Distribution Tubing (XQ) or on a PolyFlex Riser (PFR/FRA)

Models: Barb Inlet x Barb Outlet

  • PC-05: Light brown, 5 gph (18.93 l/h)
  • PC-07: Violet, 7 gph (26.50 l/h)
  • PC-10: Green, 10 gph (37.85 l/h)
  • PC-12: Dark brown, 12 gph (45.42 l/h)
  • PC-18: White, 18 gph (68.13 l/h)
  • PC-24: Orange, 24 gph (90.84 l/h)

Models: 10-32 Thread Inlet x Barb Outlet

  • PC-05-1032: Light brown, 5 gph (18.93 l/h)
  • PC-07-1032: Violet, 7 gph (26.50 l/h)
  • PC-10-1032: Green, 10 gph (37.85 l/h)

Point Source Emitter Calculator

  • This tool will calculate the Daily Plant Water Requirement (PWR), provide you with the number of emitters required to irrigate each individual plant, and suggest the run time for your point source drip irrigation project.