PEB/PESB Series

Best-in-class professional series plastic irrigation valves

The PEB Series is our most durable plastic irrigation valve. This industrial-strength glass-filled nylon globe valve is ideal for commercial irrigation applications.

The PESB series incorporates patented scrubber technology for reliable performance in dirty water irrigation applications.

Features

  • Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance.
  • Globe configuration.
  • Normally closed, forward flow design.
  • Slow closing to prevent water hammer and subsequent system damage.
  • Low flow capability for a wide range of applications.
  • One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
  • Flow control handle adjusts water flows as needed.
  • Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.
  • Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs.
  • Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads.
  • Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only).
  • Five-year trade warranty.

Specs

  • Pressure: 20 to 200 psi (1,4 to 13,8 bar)
  • Flow without PRS-D option: 0.25 to 200 GPM (0,06 to 45 m³/h; 0,02 to 12,60 l/s)
  • Flow with PRS-D option: 5 to 200 GPM (1,14 to 45 m³/h; 0,32 to 12,60 l/s)
  • Temperature: Up to 150°F (66°C)

Electrical Specifications

  • 24 VAC 50/60 Hz (cycles per second) solenoid power requirement
  • Inrush current: 0.41A (9.9VA) at 60Hz
  • Holding current: 0.14A (3.43VA) at 60Hz
  • Solenoid coil resistance: 30-39 Ohms, nominal

Options

  • Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance. Regulates up to 100 psi (6,9 bar)
  • Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10,35 bar)
  • Compatible with ESP-LXD decoders
  • Optional purple flow control handle for non-potable water applications PEB-NP-HAN1 (1"); PEB-NP-HAN2 (1½" and 2").

Dimensions

  • 100-PEB: 6½" x 4" x 4"  – (16,5 cm) x (10,2 cm) x (10,2 cm)
  • 150-PEB: 8" x 6" x 6" – (20,3 cm) x (15,2 cm) x (15,2 cm) 
  • 200-PEB: 8" x 6" x 6" – (20,3 cm) x (15,2 cm) x (15,2 cm)

Note: The PRS-D option adds 2" (5,1 cm) to the valve height.

Related Documents