You Are Here: Home > Landscape Irrigation > Products > Valves > BPES Series

BPES Series

3 Inch Brass Irrigation Valves

Rain Bird’s 3" BPES irrigation valves are built tough to offer long life and efficient, trouble-free performance under harsh conditions.

Featuring a unique combination construction of brass body and glass-filled nylon bonnet, these valves are designed to withstand extreme pressure surges, effluent water and clogging debris.

For additional protection, the BPES model is equipped with a patented scrubber mechanism to actively fight dirt and particles.





  • Unique hybrid construction featuring durable red brass body and glass-filled nylon bonnet for long life at a value price.
  • Globe and angle configuration for flexibility in design and installation.
  • Normally closed, forward flow design.
  • Slow closing to prevent water hammer and subsequent system damage.
  • Robust solenoid provides dependable performance even during constant operation.
  • Flow control handle adjusts water flows as needed and incorporates a brass thread insert for longer life.
  • Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator adjustment without turning the valve on at the controller.
  • Manual external bleed permits flushing debris from the system. Recommended for system start up and repairs
  • Highly efficient operation with extremely low pressure loss.
  • Patented nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging.
  • Three-year trade warranty.


3" (80/90) Brass Valve

Note: Specify BSP threads when ordering.

  • Pressure: 20 to 200 psi (1,4 to 13,8 bar)
  • Flow with/without PRS-D option: 60 to 300 gpm (13,6 to 68,1 m3/h; 3,78 to 18,90 l/s)
  • Temperature: up to 140° F (60° C)
  • Power: 24 VAC 50/60 Hz (cycles per second) solenoid
  • Inrush current: 0.41 A (9.8 VA) at 60Hz
  • Holding current: 0.28 A (6.7 VA) at 60Hz
  • Coil resistance: 28 Ohms, nominal


  • 300-BPE(s): H x L x W
  • 13 5/8" x 8" x 7"
  • 34,6 cm x 20,3 cm x 17,8 cm

    Note: PRS-D option adds 2": (5,1 cm) to the valve height.