You Are Here: Home > Landscape Irrigation > Products > Flow Meters > FMD Water Meters

FMD Series Landscape Water Meters

Manage what you measure.

Rain Bird FMD Series Landscape Water Meters

In order to effectively manage water use, it is necessary to measure it. Contractors realize this and are increasingly calling for flow measurement on irrigation systems.
Local municipal and state regulations, water district policies, and Green Building Code LEED, Sustainable SITES Initiative, and the EPA’s WaterSense program call for water flow measurement because of increasing water costs. Regions where water is naturally scarce, under pressure by a growing population, or is restricted by environmental laws tend to be where water agencies employ tiered water rates or increase property sewer usage fees.

The FMD Series Landscape Water Meters address this industry need for flow measurement while overcoming two common objections:

  1. Irrigation flow sensors / meters in the market today are relatively expensive.
  2. Inability of current flow meters / sensors to measure low flow with high accuracy.
  • Multi-Jet Totalizing Landscape Water Meter with analog register dial readout (minimum volumetric resolution of 0.1 gallons).
  • Brass body and glass-filled nylon construction provide maximum protection against high pressure surges, physical damage and corrosion.
  • Not to be used with an unfiltered water source containing potential debris (lakes, ponds, wells, or other unfiltered sources).
  • Lower cost than comparable brass flow meters and most plastic flow sensors.
  • Passive management of irrigation using the meter’s register dial.
  • Delivers precise accuracy with flow ranges from 0.25 gpm to 160 gpm.
  • Landscape Water Meter allows the property manager to avoid higher costs associated with tiered water rates.
  • Landscape Water Meters are an integral part of an overall water efficient irrigation system.
  • Supports California AB1881 and 20/20, LEED, Sustainable Sites Initiative, and the EPA WaterSense Program.
  • Rebates offered by Water Agencies.
  • Satisfies NSF/ANSI standard 61 Annex G.

FMD100B 1 inch Landscape Water Meter
FM0625B
5/8 inch Water Meter

FMD150B 1.5 inch Landscape Water Meter
FM075B
3/4 inch Water Meter

FMD100B 1 inch Landscape Water Meter
FM100B
1 inch Water Meter

FMD150B 1.5 inch Landscape Water Meter
FM150B
1 1/2 inch Water Meter

FMD200B 2 inch Landscape Water Meter
FM200B
2 inch Water Meter

 


 

The following tables indicate the suggested flow range for Rain Bird FMD Series Landscape Water Meters. Rain Bird Sub-Meters will operate both above and below the indicated flow rates. However, good design practice dictates the use of this range for best performance. Landscape Water Meters should be sized for flow rather than pipe size.

Rain Bird Landscape Water Meters Operating Specifications

Model

Sub-meter Size

Flow Range

Body Thread (D)

FM0625B

5/8 inch

0.25 to 20 GPM

3/4" x 3/4"

FM075B

3/4 inch

0.5 to 30 GPM

1" x 1"

FM100B

1 inch

0.75 to 50 GPM

1" x 1"

FM150B

1 1/2 inch

1.5 to 100 GPM

1 1/2" x 1 1/2"

FM200B

2 inch

2.0 to 160 GPM

2" x 2"

  • Maximum operating pressure is 150 psi for all models.
  • Maximum working water temperature is 80° F for all models.
  • Maximum operating air temperature is 105° F for all models.
  • Measurement accuracy at minimum flow is +/- 3% for each model.