EFB-CP & EFB-CP-R Series
Brass Valves

Electric remote control valves don't come any better than the EFB-CP and EFB-CP-R Series red brass valves. Need a contamination-proof, self-flushing screen that cleans itself and resists debris build-up in dirty water? The EFB-CP's the one! Now also available in a reclaimed water valve configuration, the EFB-CP-R is designed to handle chlorine and other harsh chemicals found in reclaimed water systems. EFB-CP-R Series valves offer long life and superior performance in high pressure applications.

Features and Benefits:

• Red brass body and bonnet for longer life and more rugged performance at 200 psi (13,80 bar).
• Reverse flow feature ensures valves fail in the closed position if the diaphragm tears or rips. Prevents flooding, water waste and landscape damage.
• Fluid resistor slows flow through the solenoid, reducing closing speed and preventing water hammer and system damage.
• One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
• Low-power requirement allows for longer wire runs without increased wire gauge.
• Manual internal and external bleed.
• Adjustable flow control.
• Contamination-proof, self-flushing nylon (EFB-CP) or stainless steel (EFB-CP-R) screen resists debris build-up. Water flow continuously flushes the screen, dislodging particles and debris before they can accumulate and clog the filter.

Options:

• Accommodates optional, field installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
• Optional purple flow control handle for non-potable water applications (EFB-GB-NP-HAN).
• Accepts latching solenoid for use with Rain Bird battery-operated controllers up to 150 psi (10,35 bar)

Operating Range :

• Pressure: 15 to 200 psi (1,04 to 13,80 bar)
• Flow with/without PRS-D:
  5 to 200 GPM (1.14 to 45,40 m³/h; 0,32 to 12,60 l/s)
• Temperature: up to 150° F (66° C)

Electrical Specifications:

• 24 VAC 50/60 Hz (cycles per second) solenoid
• 0.41 A (9.84 VA) inrush current
• 0.28 A (6.7 VA) holding current

Models:

• 100-EFB-CP: 1" (26/34)*
• 125-EFB-CP: 1 1/4" (33/42)
• 150-EFB-CP: 1 1/2" (40/49)*
• 200-EFB-CP: 2" (50/60)*
  *Available with BSP threads
  
• Note: Valve and PRS-D module must be ordered separately.
• Note: Purple flow control handle must be ordered separately.
  

1. Rain Bird recommends flow rates in the supply line not to exceed 7.5 ft./sec. (2,3 m/s) in order to reduce the effects of water hammer.
2. For flows below 5 GPM (1,14 m³/h; 0,32 l/s) Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm.
3. For flows below 10 GPM (2,27 m³/h; 0,63 l/s) Rain Bird recommends the flow control stem be turned down two full turns from the fully open position.

Dimensions:
H x L x W

• 100-EFB-CP
  6" (15,2 cm) x 4 1/2" (11,4cm) x 3 1/4" (8,3 cm)
  
• 125-EFB-CP
  5 3/4" (14,6 cm) x 5" (12,7 cm) x 3 1/4" (8,3 cm)
  
• 150-EFB-CP
  6 1/2" (16,5 cm) x 5 1/2" (14 cm) x 4 1/2" (11,4 cm)
  
• 200-EFB-CP
  7" (17,8 cm) x 6 3/4 " (17,1 cm) x 5 3/4" (14,6 cm)
• 100-EFB-CP-R
  6" (15,2 cm) x 4 1/2" (11,4cm) x 3 1/4" (8,3 cm)
  
• 150-EFB-CP-R
  6 1/2" (16,5 cm) x 5 1/2" (14 cm) x 4 1/2" (11,4 cm)
  
• 200-EFB-CP-R
  7" (17,8 cm) x 6 3/4 " (17,1 cm) x 5 3/4" (14,6 cm)
  
  Note: The PRS-D option adds 2" (5,1 cm) to the valve height.