Pressure-Compensating Modules
Point Source Emission Devices

These higher flow, pressure-compensating emission devices (5-24 GPH) are ideal for irrigating large shrubs and trees and for precisely regulating water flow to Xeri-Bubblers and Xeri-Sprays. Now available in both self-piercing inlet barb and 10-32 threaded inlet versions.

Features & Benefits:

• Higher-flow emission devices are ideal for irrigating large shrubs and trees and for precisely regulating flow to Xeri-Bubblers and Xeri-Sprays.
• Rubber discs deliver uniform flow through a wide pressure range (10 psi to 50 psi; 0,7 to 3,5 Bars).
• Color-coded outlet barb gives visual identification of flow rate.
• Self-piercing inlet barb permits one-step emitter insertion into 1/2" or 3/4" drip tubing when installed with XM-Tool.
• Used to control flow in the Xeri-Bird™ 8 multi-outlet emission device.
• Outlet barb securely retains 1/4" distribution tubing (DT-025).
• Housing constructed of durable, UV-resistant plastic.
• Use of PC Drip Emitter Diffuser Cap is recommended to help prevent wash-out.

Self-Piercing Inlet Barb Models:

• PC-05: light brown, 5 GPH (18,95 l/h)
• PC-07: violet, 7 GPH (26,53 l/h)
• PC-10: green, 10 GPH (37,90 l/h)
• PC-12: dark brown, 12 GPH (45,48 l/h)
• PC-18: white, 18 GPH (68,22 l/h)
• PC-24: orange, 24 GPH (90,96 l/h)

10-32 Threaded Inlet Models:

• PC-05 10-32: light brown, 5 GPH (18,95 l/h)
• PC-07 10-32: violet, 7 GPH (26,53 l/h)
• PC-10 10-32: green, 10 GPH (37,90 l/h)
• PC-12 10-32: dark brown, 12 GPH (45,48 l/h)
• PC-18 10-32: white, 18 GPH (68,22 l/h)
• PC-24 10-32: orange, 24 GPH (90,96 l/h)

* When using a PC module on drip tubing, 4" to 6" of 1/4" distribution tubing (DT-025) must be attached to the outlet port of the PC module in order to prevent squirting. PC-12, PC-18, and PC-24 models should only be used with Xeri-Bubblers™, Xeri-Sprays™, and the Xeri-Bird™ 8.