CYCLIK™ Micro
Wireless Automatic Control System

Cyclik Micro Mode A

Growers who need to irrigate on a weekly schedule may use Cyclik Micro Program A. The first step is to choose the days of the week to receive irrigation, and skip the days that will not get water. Next, set the start time and run time, up to 8 start times per day, and the Cyclik control modules will repeat the program until a new program is entered.

Example: A remote pasture requires irrigation Monday through Friday only. On irrigation days, the pasture needs two irrigations per day, three hours starting at 5 AM, and for one hour starting at 3 PM.

Key Features

• Works with 1, 2, or 4 station control modules
• Up to 8 start times and run times per day
• Can assign an independent program to each station

Cyclik Micro Mode B

This sequence is designed for growers that want to operate on the same schedule every day, and need to irrigate in short bursts, followed by a “soak-in” time. After the time of day is set, the next step is to enter the start time and end time of the irrigation window (up to 2 irrigation windows per day). Once the irrigation windows are set, the final step is to enter the run time (from 10 seconds up to 99 minutes), and soak time (up to 99 minutes) within the irrigation windows.

Example: A Greenhouse requires 30 seconds on and 3 minutes off all day from 6 AM to 7 PM.

Key Features

• Works with single station control modules
• Up to 2 irrigation operating windows per day
• 10 seconds to 99 minutes irrigation “run time”
• 1 minute to 99 minutes “soak time”