Step 1

Place the Spot Watering Emitter on end of tool. Press barbed point into side wall of 1/2" Tubing. [The Emitter Tool also works with 1/4" Barbed Couplings and with 1/4" Barbed Tees.]

Step 2

Pull tool away, leaving the Spot Watering Emitter
embedded in tubing.

Step 3

Push 1/4" tubing onto the Spot Watering Emitter.

Step 4

To remove Spot Watering Emitters, use side of tool.

Step 5

1/4" Tubing Plugs can be used to seal holes in 1/2" tubing. Use bottom of Emitter Tool to insert these plugs.